journal article·2015-08

Fabrication of Nb2O5/SiO2 mixed oxides by reactive magnetron co-sputtering

Kęstutis Juškevičius, Martynas Audronis, Andrius Subačius, Simonas Kičas, Tomas Tolenis, Rytis Buzelis, Ramutis Drazdys, Mindaugas Gaspariūnas, Vitalij Kovalevskij, Allan Matthews, Adrian Leyland

Thin Solid Films· Volume 589
Publisher page

Abstract

This paper investigates niobia/silica mixed oxide thin films deposited by reactive pulse-DC/RF magnetron co-sputtering of Nb and Si metal targets at room temperature. The reactive gas flow during the sputtering processes was either controlled by direct mass flow rate (i.e. constant reactive gas flow) or by an active feedback process control system. 61% and 137% higher deposition rates of Nb2O5 and SiO2 layers, respectively, were obtained using the latter technique as compared to constant reactive gas flow. Films exhibited bulk or near-bulk density. All mixture films produced in this study had an amorphous structure. A volume law of mixtures was used to determine the coating composition. It is shown that the fraction of SiO2 or/and Nb2O5 has a linear dependency on sputter target power density. On this basis, rugate filter coating designs can be easily deposited, where refractive index gradually varies between that of pure Nb2O5 and pure SiO2. Substantially less inhomogeneity of coating mixtures was found in films produced using a reactive sputtering process with feedback-control.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Low loss niobium oxides film deposited by ion beam sputter deposition10.1023/A:1007050204074 ↗
2. Comparison of laser-induced damage in Ta2O5 and Nb2O5 single-layer films and high reflectors10.3788/COL201109.013102 ↗
3. Characterization of metal-oxide thin films deposited by plasma-assisted reactive magnetron sputtering10.3788/COL201008S1.0073 ↗
4. Porous silicon-based rugate filters10.1364/AO.44.005415 ↗
5. Rapid prototyping of optical thin film filters10.1117/12.404754 ↗
6. Characterization of zirconia and niobia silica mixture coatings produced by ion-beam sputtering10.1364/AO.50.00C188 ↗
7. Investigations on SiO2/HfO2 mixtures for nanosecond and femtosecond pulses10.1117/12.867238 ↗
8. Gradient-index antireflection coatings10.1364/OL.8.000584 ↗
9. Rugate filter sidelobe suppression using quintic and rugated quintic matching layers10.1364/AO.28.002949 ↗
10. Investigation in oxide mixture coatings with adapted gradient index profiles10.1117/12.836462 ↗
11. Low-loss dielectric mirror with ion-beam-sputtered TiO2–SiO2 mixed films10.1364/AO.40.002177 ↗
12. Stress reduction in ion beam sputtered mixed oxide films10.1364/AO.28.002800 ↗
13. Optical and thin film properties of mixed oxides deposited by pulsed reactive magnetron sputtering10.1117/12.896838 ↗
14. Optical properties of silicon titanium oxide mixtures prepared by metallic mode reactive sputtering10.1364/AO.51.008047 ↗
15. Investigation of the distribution of laser damage precursors at 1064nm, 12ns on niobia–silica and zirconia–silica mixtures10.1364/OE.20.026089 ↗
16. The microstructure and LIDT of Nb2O5 and Ta2O5 optical coatings10.1117/12.696259 ↗
17. Compositional dependence of absorption coefficient and band-gap for Nb2O5–SiO2 mixture thin films10.1016/j.tsf.2007.07.028 ↗
18. Roughness evolution in thin-film growth of SiO2 and Nb2O510.1063/1.2130521 ↗
19. Magnetron discharges for thin films plasma processing
20. The mechanism of reactive sputtering10.1007/BF00549739 ↗
21. Control of reactive high power impulse magnetron sputtering processes10.1016/j.surfcoat.2009.11.040 ↗
22. Growth and characterization of zirconium oxynitride films prepared by reactive direct current magnetron sputtering10.1063/1.1498963 ↗
23. Reactive alternating current magnetron sputtering of dielectric layers10.1116/1.577745 ↗
24. Pulsed magnetron sputter technology10.1016/0257-8972(93)90248-M ↗
25. High-rate reactive magnetron sputtering of zirconia films for laser optics applications10.1007/s00339-013-8214-1 ↗
26. Unlocking the potential of voltage control for high rate zirconium and hafnium oxide deposition by reactive magnetron sputtering10.1016/j.vacuum.2014.04.025 ↗
27. Tailoring of structure formation and phase composition in reactively sputtered zirconium oxide films using nitrogen as an additional reactive gas10.1063/1.2903492 ↗
28. The properties of RF sputtered zirconium oxide thin films at different plasma gas ratio10.5012/bkcs.2010.31.02.397 ↗
29. Structural and optical properties of thin zirconium oxide films prepared by reactive direct current magnetron sputtering10.1063/1.1503858 ↗
30. Discharge voltage measurements during magnetron sputtering10.1016/j.surfcoat.2005.02.166 ↗
31. Target poisoning during reactive magnetron sputtering: Part I: the influence of ion implantation10.1016/j.surfcoat.2003.10.006 ↗
32. Target poisoning during reactive magnetron sputtering: Part II: the influence of chemisorption and gettering10.1016/j.surfcoat.2003.10.007 ↗
33. Bemerkung zur Theorie des Lichtdurchgangs durch inhomogene durchsichtige Schichten10.1002/andp.19414310110 ↗
34. Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen10.1002/andp.19354160705 ↗
35. Optical constants and thickness determination of very thin amorphous semiconductor films10.1063/1.1500785 ↗
36. Optical properties and band gap characterization of high dielectric constant oxides10.1016/j.tsf.2011.10.195 ↗
37. The tension of metallic films deposited by electrolysis10.1098/rspa.1909.0021 ↗
38. Residual stress in Ta2O5–SiO2 composite thin-film rugate filters prepared by radio frequency ion-beam sputtering10.1364/AO.47.00C167 ↗
39. Application of heavy-ion RBS to compositional analysis of thin films10.1016/S0168-583X(97)00696-4 ↗
40. Accurate determination of quantity of material in thin films by rutherford backscattering spectrometry10.1021/ac300904c ↗
41. Intrinsic stress in dielectric thin films for micromechanical components10.1016/S0257-8972(99)00114-0 ↗
42. The correlation between mechanical stress, thermal shift and refractive index in HfO2, Nb2O5, Ta2O5 and SiO2 layers and its relation to the layer porosity10.1016/j.tsf.2009.05.009 ↗
43. Rutherford Backscattering Spectroscopy
44. XPS and RBS investigation of TiNxOy films prepared by vacuum arc discharge10.1016/j.nimb.2011.11.010 ↗
45. Effect of sputtering pressure and rapid thermal annealing on optical properties of Ta2O5 thin films10.1016/S1003-6326(08)60278-2 ↗
46. Influence of substrate temperature on the structural, dielectric and optical properties of RF magnetron sputtered Ta2O5 films
47. Determination of optical constants of solgel-derived inhomogeneous TiO2 thin films by spectroscopic ellipsometry and transmission spectroscopy10.1364/AO.37.000691 ↗
48. Mixed films of TiO2–SiO2 deposited by double electron-beam coevaporation10.1364/AO.35.000090 ↗