article·2002-11-01

High deposition rate of epitaxial (100) Iridium film on (100)YSZ/(100)Si substrate by RF sputtering deposition

Tran Dang Khoa, Sadayoshi Horii, Susumu Horita

Publisher page

Abstract

Abstract We investigated the crystalline quality and resistivity of an epitaxial Ir film deposited on an epitaxial (1 0 0)YSZ/(1 0 0)Si substrate by RF magnetron sputtering method. It has been reported that the orientation of Ir film deposited on YSZ film depends on the deposition rate. In our case, the surface of the YSZ/Si structure was cleaned by diluted HF solution, just before loading the sample to the sputtering chamber. It was found that even when the sputtering gas pressure was increased to 15 Pa and the deposition rate from 0.5 to 60 nm/min, respectively, the Ir film was still epitaxially grown with a high (1 0 0) orientation. This is because the diluted HF solution treatment cleaned off the YSZ/Si surface. When the deposition rate was increased, the crystalline quality and resistivity of the film were decreased and increased, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Acoustic Wave Resonator Technologies · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.