article·2009-03-13

Enhanced performance in organic light-emitting diodes by sputtering TiO2 ultra-thin film as the hole buffer layer

Lintao Hou, Pengyi Liu, Yanwu Li, WU Chun-hong

Publisher page

Abstract

Organic light-emitting diodes were prepared using titanium oxide (TiO2) ultra-thin film by RF magnetron sputtering as the hole buffer layer. The device configuration is ITO/TiO2/N-N'-diphenyl-N-N'-bis(1-naphthyl)-1,1'-biphenyl-4,4'-diamine/tris(8-quinolinolato)-aluminum/LiF/Al. The maximum luminous efficiency for the 1.2 nm TiO2 device is increased by approximately 46% (6.0 cd/A), in comparison with that of the control device (4.1 cd/A). The atomic force microscopy shows that with the insertion of TiO2 buffer layer, the roughness of ITO surface decreases, which is favorable to improve the device luminance and increase the device lifetime. The mechanism behind the enhanced performance is that the TiO2 layer enhances most of the holes injected from the anode and improves the balance of the hole and electron injections. (C) 2009 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.