article·2001-08-15

A comparative study of sputtered TaCx and WCx films as diffusion barriers between Cu and Si

Shui-Jinn Wang

Publisher page

Abstract

Abstract The barrier properties of sputter-deposited tantalum carbide (TaC x ) and tungsten carbide (WC x ) for Cu metallization were investigated and compared. The incorporation of the C atom is shown to be effective in decorating local defects of the barrier layer and improving the thermal stability of the Cu/barrier/Si contact system. Owing to a higher melting point and better chemical inertness, with respect to Si substrate, the TaC x (600 A) film shows a better thermal stability (up to 650°C) than that of WC x (∼600°C) film based on material analyses, while the highest stable temperature as evaluated by the n + p-diode leakage measurement is found to be approximately 550°C for the TaC x and 500°C for the WC x barrier layer. The failure of the TaC x and WC x barriers is found to be mainly due to Cu diffusion through the localized defects of the barrier layers into the Si substrate. The interfacial reaction between the WC x layer and the Si substrate is found to play an additional role in the failure of the WC x film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.