article·2006-11-28

Organometallic vapour deposition of crystalline aluminium oxide films on stainless steel substrates

Christian Pflitsch, Dorothee Viefhaus, Ulf Bergmann, Burak Atakan

Publisher page

Abstract

The organometallic vapour deposition of aluminium oxide films in a cold wall reactor was studied at temperatures between 773 and 1273 K and the pressure range of 55–1000 hPa. Aluminium acetylacetonate and oxygen were used as precursors. All films were characterized by scanning electron microscopy, electron dispersive X-ray spectroscopy and X-ray diffraction. Film growth at low pressure (55 hPa) was analyzed as a function of the deposition temperature: It is mainly surface kinetically controlled, and films grown at low temperatures (< 1073 K) are amorphous and transparent, while those grown at 1273 K are dark and crystalline. Thereby the latter ones consist of different phases: γ-Al2O3, θ-Al2O3, and α-Al2O3. These crystalline films are spalling. In addition, the influence of the total pressure on the deposition was studied for high deposition temperatures (1273 K): Film growth was significantly faster at pressures below 300 hPa. Additionally, a phase change is observed with increasing pressure: Films deposited at 55 hPa consist of three phases, γ-Al2O3, θ-Al2O3, and α-Al2O3, whereas above 200 hPa mainly the latter two phases are observed. Films grown at high pressures above 200 hPa are better adhering.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.