article·2003-11-02

High rate etching of 6H–SiC in SF6-based magnetically-enhanced inductively coupled plasmas

D.W. Kim, Hyoyoung Lee, B.J. Park, H.S. Kim, Youngje Sung, Seung‐Hoon Chae, Young Wook Ko, G.Y. Yeom

Publisher page

Abstract

In this study, the etch characteristics of 6H–SiC were investigated in magnetically-enhanced SF6 inductively-coupled-plasmas (ICP) with and without magnetic field. The etch characteristics of various metal films such as Ni, Al and Cu were also investigated to apply as the etch mask to the highly selective SiC etching process. With the magnetic field, the etch rates of SiC were increased 60% compared to those without the magnetic field. With the magnetic field, the etch rates of Ni and Al were also increased white the etch rates of Cu decreased. In fact, in the case of Cu etching using SF6, deposition instead of etching occurred through the formation of etch products such as copper fluoride on the surface with fluorine in the plasma. Therefore, among the investigated mask materials, Cu showed infinite etch selectivity over SiC during etching using SF6. The highest etch rate obtained for SiC was greater than 1500 nm/min at 1500 W of inductive power, −350 V of bias voltage, and 1.33 Pa of SF6. SiC etching with the Cu mask showed highly anisotropic etch profiles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Copper Interconnects and Reliability · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.