Structural, electrical and optical properties of radio frequency sputtered indium tin oxide thin films modified by annealing in silicon oil and vacuum
Source abstract
Abstract
Abstract Indium tin oxide thin films (thickness ~ 300 nm) have been deposited on glass at the substrate temperature of 65 °C by radio frequency magnetron sputtering with the power density of 1.25 W cm − 2 under argon atmosphere and annealed subsequently in silicon oil at 200° and 350 °C to investigate systematically the effects on their structural, optical and electrical properties. As-deposited thin films after annealing at 350 °C exhibit marked changes in the microstructure with emergence of crystallites (average size ~ 51 nm), high optical transmittance (~ 86%) in the visible range, and electrical resistivity as low as 1.24 × 10 − 3 Ω-cm with high figure of merit of 5.35 × 10 − 3 Ω − 1 square — indicating their suitability as transparent conducting anode for opto-electronic devices. Further, the above findings are compared with those observed in case of films annealed in vacuum (~ 4 × 10 − 4 Pa) at 350 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.