article·2007-08-22

Intrinsic stresses and stress relaxation in TiN/Ag multilayer coatings during thermal cycling

Harald Köstenbauer, G.A. Fontalvo, J. Keckes, Christian Mitterer

Publisher page

Abstract

Abstract Morphology, structure and thermal behavior of magnetron sputtered TiN/Ag multilayer thin films deposited at 150 °C with a bilayer thickness Λ in the range of 75–600 nm are characterized. The films are thermally cycled and the relationship between bilayer thickness Λ , film structure and stress development is analyzed. The results indicate that the residual stresses in the as-deposited films and the behavior during heating are determined by the morphology and the mechanical properties of the Ag interlayers. The increasing crystallite size of Ag with increasing Λ and the initial porosity in the Ag layer are the reason for significant changes in the stress–temperature behavior. While coatings with Λ = 75 nm behave like a single-phase coating up to 380 °C, coatings with higher Λ show a different behavior when exceeding the deposition temperature, which is related to the densification of the Ag layers. During cooling, all coatings exhibit linear thermo-elastic behavior, where the slope of the stress–temperature curves also depends on Λ .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.