article·2004-05-29

Influence of process parameters on the characteristics of indium zinc oxide thin films deposited by DC magnetron sputtering

Young Soo Song, Jung Koo Park, Tae Wan Kim, Chee Won Chung

Publisher page

Abstract

Abstract The deposition of indium zinc oxide (IZO) thin films was carried out on glass substrate at room temperature by dc magnetron sputtering. The effects of dc power and deposition pressure were investigated with respect to physical and optical properties of films such as deposition rate, electrical properties, microstructure and transmittance. As the dc power increases, the resistivity slightly increases and the transmittance gradually decreases. For the variation of deposition pressure, the resistivity greatly increases and the transmittance is decreased with increasing deposition pressure. The observation of the IZO films by atomic force microscopy indicates that the microstructure and surface morphology of the films are responsible for the transmittance. It was demonstrated that IZO films with a resistivity of 3.8×10−4 Ω cm and an optical transmission of 80–90% in the visible spectrum could be prepared without post deposition annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.