Plasma spraying of stainless-steel particles coated with an alumina shell
Source abstract
Abstract
Abstract The effect of an alumina coating, obtained by mechanofusion, on stainless-steel particles used in plasma spraying has been studied by examining sprayed particles in mid-flight and their resulting splats and coatings. The mean size of the injected powders is about 65 μm and the thickness of the alumina shell 4 μm. The results show that without preheating the substrate the splats of both types of powder are extensively fingered and become circular when the substrate surface is preheated over 200°C. For the case of the stainless steel/alumina composite splats, Energy dispersive spectroscopy (EDS) analysis of the distribution of the various elements shows that the alumina is either spread exactly on the stainless-steel splat or is dispersed in pieces and frozen over the surface of the stainless-steel splat. The first case corresponds to well molten particles where, after their flight in the plasma jet, all the alumina shell has flowed to the tail of the particle; the second case is related to particles which have still an alumina shell uniformly distributed around the stainless-steel core. Finally, a composite stainless steel/alumina coating sprayed on a rough (Ra ∼6.7±0.3 μm) stainless-steel substrate preheated to 400°C is compared with a pure stainless-steel coating. Both hardness and cohesion are found to improve for the alumina-coated particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.