article·2000-08-01

Ultrathin Ta2O5 films produced by large-area pulsed laser deposition

S. Boughaba, Muhammad Monirul Islam, J. P. McCaffrey, G. I. Sproule, M. J. Graham

Publisher page

Abstract

Abstract Tantalum pentoxide (Ta2O5) is an important material for the next generation of microelectronics devices. A large-area pulsed laser deposition (PLD) technique was used to uniformly grow ultrathin (5–20-nm-thick) Ta2O5 films on silicon wafers of 75 mm diameter, heated to a temperature of 400°C. A KrF excimer laser beam was used to induce the ablation of a target in oxygen gas ambient, at a pressure of 30 mTorr. The large-area coverage was obtained by rastering the laser beam over the radius of the rotating target, while the substrate was rotated simultaneously. The deposition rate was calculated to be 4.8 nm/min. The Ta2O5 films were fully dense and amorphous, and excellent uniformity was achieved in terms of structure, composition, thickness and optical properties across every wafer. An investigation of the Ta2O5/silicon interface revealed that the growth of the films was accompanied by the formation of a silicon oxide interlayer. This is the first time the PLD technique is demonstrated to produce uniform ultrathin films over large areas (75 mm diameter).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.