article·2008-10-31

Needle-like LiFePO4 thin films prepared by an off-axis pulsed laser deposition technique

Jinpeng Sun, Kun Tang, Xiqian Yu, Hong Li, Xuejie Huang

Publisher page

Abstract

Lithium iron phosphate (LiFePO4) thin films were prepared by pulsed laser deposition with an off-axis geometry. Amorphous, needle-like and crystallized granular thin films were prepared on Si and titanium substrates. The preferred orientation of these crystallized LiFePO4 thin films is (120). Microstructures of the deposited films are dependant on the substrate temperature (room temperature, 500 degrees C and 700 degrees C) and At pressure (5 Pa and 30 Pa) in the chamber. The needle-like film grows following a self-shadowing mechanism. LiFePO4 thin film with high crystallinity shows a voltage plateau which is a typical feature of the phase transition reaction for bulk material, while the sloped profiles are observed clearly in the charging and discharging curves of LiFePO4 thin films with low cystallinity. (C) 2008 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.