Preparation and properties of thermistor thin-films by metal organic decomposition
Source abstract
Abstract
Abstract Thin thermistor films of chemical composition Ni 0.48 Co 0.24 Cu 0.6 Mn 1.68 O 4 were prepared by metal organic decomposition (MOD). Stock solution that was used for thin-film deposition was prepared by dissolving manganese (III) and nickel (II) acetylacetonates, cobalt acetate and copper nitrate in a mixture of methanol, ethylene glycol and acetic acid. Thin-films were fabricated by either dip-coating or spin-coating. Polycrystalline single-phase cubic spinel was obtained after annealing from 600 to 800°C in air. Smooth and dense thin-films, free from cracks, were formed on aluminosilicate glass, however, the thin-film surface was irregular on fused silica, suggesting that the coefficient of thermal expansion of the substrate plays a crucial role in thin-film morphology. Electrical properties are strongly influenced by the annealing temperature: the resistivity and hopping activation energy vary from ρ (298 K) =9.75 Ω cm and E H =0.139 eV for films annealed at 600°C to ρ (298 K) =1015 Ω cm and E H =0.247 eV for the films annealed at 800°C. The Seebeck coefficient was negative for the films annealed at 600 and 650°C and became positive for films annealed at higher temperatures. Electrical conduction was described in terms of small polaron hopping between Mn 4+ and Mn 3+ cations located in octahedral sites of the spinel structure. Changes of the electrical properties were attributed to the reduction of manganese Mn 4+ →Mn 3+ during annealing at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.