article·2009-03-27

Nanotube formation and morphology change of Ti alloys containing Hf for dental materials use

Yong‐Hoon Jeong, Kang Lee, Han‐Cheol Choe, Yeong‐Mu Ko, William A. Brantley

Publisher page

Abstract

Abstract In this paper, Ti–Hf (10, 20, 30 and 40 wt.%) alloys were prepared by arc melting, and subjected to heat treatment for 24 h at 1000 °C in an argon atmosphere. Formation of surface nanotubes was achieved by anodizing a Ti–Hf alloy in 1.0 M H 3 PO 4 electrolytes with small amounts of NaF at room temperature. Microstructures of the alloys and nanotube morphology were examined by field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The homogenized Ti–Hf alloys had a needle-like microstructure of α phase, and nanotubes formed on Ti– x Hf alloys had the anatase phase after treatment that promoted crystallization. Uniform nanotubes formed for Hf contents up to 20 wt.%. Irregular nanotubes formed on the Ti–30Hf and Ti–40Hf alloys. The structure of the irregular layers on the Ti–30Hf and Ti–40Hf alloys had nanotubes of two sizes. Increasing the Hf content in Ti led to the formation of nanotubes with more narrow size. The pores in the nanotubes typically had a diameter ranging from 80–120 nm and a length of approximately 1.7 μm. It is concluded that nanotube morphology on Ti–Hf alloys can controlled by varying the amount of Hf.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.