journal article·2011-08

Chromizing of plasma nitrided AISI 1045 steel

F. Hakami, M. Heydarzadeh Sohi, J. Rasizadeh Ghani, M. Ebrahimi

Thin Solid Films· Volume 519· Issue 20
Publisher page

Abstract

Abstract In this study AISI 1045 steel specimens were plasma nitrided at 803 K for 5 h, in a gas mixture of 75% N 2 + 25% H 2 . The specimens were then chromized in powder mixtures consisting of ferrochromium, ammonium chloride and alumina at 1273 K for 5 h. Scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis and Vickers micro-hardness test were used as characterizing techniques. The thickness of white nitrided layer was around 5 μm, which was mainly composed of iron nitrides and its hardness was around 740 HV. Chromizing of nitride layer resulted in formation of Cr 2 N chromium nitride and Fe 3 N iron nitrides. A significant increase was observed in hardness after chromizing of the nitrided layer. Despite its higher hardness, the post chromised specimen showed higher wear rate than single plasma nitrided specimen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Cr (N, C) diffusion coating formation on pre-nitrocarburised H13 tool steel10.1016/S0257-8972(03)00791-6 ↗
2. High temperature wear and friction properties of duplex surface treated bearing steels10.1016/j.surfcoat.2007.12.015 ↗
3. Effect of plasma nitriding on the surface properties of the chromium diffusion coating layer in iron base alloys10.1016/S0257-8972(99)00234-0 ↗
4. Duplex surface treatment of chromium pack diffusion and plasma nitriding of mild steel10.1016/S0257-8972(02)00607-2 ↗
5. Effect of N2+H2 gas mixtures in plasma nitriding on tribological properties of duplex surface treated steels10.1016/j.matchar.2008.04.010 ↗
6. Formation of chromium nitride layers on AISI 1010 steel by nitro-chromizing treatment10.1016/j.vacuum.2006.07.002 ↗
7. The effect of temperature on plasma nitriding behaviour of DIN 1.6959 low alloy steel10.1016/j.vacuum.2006.03.010 ↗
8. Comparative study of the corrosion behaviour of plasma nitrocarburised AISI 4140 steel before and after post-oxidation10.1016/j.matdes.2010.04.017 ↗