Fabrication of high-speed polyimide-based humidity sensor using anisotropic and isotropic etching with ICP
Source abstract
Abstract
A novel high-speed, high-sensitivity capacitive-type humidity sensor is fabricated by using a new microfabrication process involving combination of directional and isotropic etching with inductively coupled plasma (ICP) etcher and a localized curing of polyimide films on a micro-hotplate. The polyimide humidity sensor is found to have a sensitivity of 0.75 pF/%RH, a linearity of 0.995, a hysteresis of 1.32%RH, a time response of 3 s, and a temperature coefficient of 0.22%RH/°C. This high-sensitivity and high-speed device is achieved using the locally-cured polyimide and a sensor structure having many holes and allowing moisture to diffuse through the top and side surfaces of polyimide film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical and Optical Resonators · Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Gomez · J. Vac. Sci. Technol. A · 2004 · 22 · 60610.1116/1.1710493 ↗
2. Morikawa · Thin Solid Films · 2007 · 515 · 491810.1016/j.tsf.2006.10.100 ↗
3. Chen · EEE Sens. J. · 2007 · 7 · 163210.1109/JSEN.2007.908922 ↗
4. Larsen · J. Micromech. Microeng. · 2005 · 15 · 87310.1088/0960-1317/15/4/028 ↗
5. Zhu · Proc. IEEE MEMS · 2000 · 568
6. Luo · Proc. IEEE MEMS · 2000 · 502
7. l Gupta · Sens. Actuators · 2000 · 150
8. Kang · IEEE Trans. Electron Devices · 2000 · 47 · 70210.1109/16.830983 ↗
9. Pryde · J. Polym. Sci. Part A: Polym. Chem. · 1989 · 27 · 71110.1002/pola.1989.080270229 ↗