Fabrication of dye-sensitized solar cells using TiO2-nanotube arrays on Ti-grid substrates
Source abstract
Abstract
Self-aligned TiO2 nanotube arrays (20 μm in length) were fabricated by anodic oxidation of Ti-grid with a thickness of 100 μm in an ethylene glycol electrolyte with an addition of H2O (1.5 vol.%) and NH4F (0.2 wt.%). Voltage applied between Ti and Pt cathodes is 60 V at ~ 22 °C. Dye-sensitized solar cell utilizing photoanode structure of TiO2-nanotube/Ti-grid was fabricated with no transparent conducting oxide (TCO) layer, in which Ti-grid replaces TCO. Overall photoconversion efficiency is very low (< 0.5%) due to the large pore size (100 nm in diameter) of the nanotubes, which may cause insufficient dye molecules to be attached, thus limiting light harvesting.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.