Growth of Cu(In,Ga)Se2 films using a Cu-poor/rich/poor sequence: substrate temperature effects
Source abstract
Abstract
Thin film Cu(In,Ga)Se2 is grown using constant substrate temperatures and deposition times of less than 20 min for film thicknesses of 2 μm. In the growth process used, referred to as the CUPRO process, only the Cu flux varies, in such a manner that the film evolves from Cu-poor to Cu-rich to Cu-poor. The evolution of the film is monitored by tracking the change in the thermal response of the substrate. Films and devices are produced using a given evolution of the Cu content and their quality and characteristics are correlated to the substrate temperature, between 475 and 550 °C. The films are analysed by scanning electron microscopy and X-ray diffraction (XRD), the devices by current–voltage and quantum efficiency (I(V) and QE(λ)) measurements. Morphologically, the bottom fraction of the layers, grown prior to the film becoming Cu-rich, does not appear to be very temperature dependent, whereas differences are observed in the upper fraction, which result from the Cu-rich and back to Cu-poor stages of the growth. From the device parameters a shift in the bandgap of the Cu(In,Ga)Se2 with substrate temperature is found. The XRD study shows (2 2 0)(2 0 4) orientation of the films grown at the lower temperatures. Total area device efficiencies up to 15.5%, without AR, have been obtained, without large impact of the substrate temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.