Deposition and annealing effect on lanthanum sulfide thin films by spray pyrolysis
Source abstract
Abstract
Abstract Lanthanum sulfide thin films were prepared on glass substrates from aqueous medium using spray pyrolysis technique. The effect of preparative parameters such as substrate temperature and solution concentration on the films was studied. The lanthanum sulfide films were annealed in air at 300 °C for 2 h. The films were characterized by X-ray diffraction (XRD), optical microscopy, optical absorption, electrical resistivity and thermo-emf measurement techniques. The XRD studies revealed that the as deposited films are amorphous, while annealed films are polycrystalline. The optical band gap of the as deposited film is decreased from 2.5 to 2.2 eV after annealing due to improvement in crystallinity. The electrical resistivity is of the order of 10 4 –10 5 Ω cm and showed semiconducting behaviour. Thermo-emf measurement revealed that the conductivity of lanthanum sulfide is p-type.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Chalcogenide Semiconductor Thin Films · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.