article·2007-07-05

Deposition of new microcrystalline materials, μc-SiC, μc-GeC by HWCVD and solar cell applications

Makoto Konagai

Publisher page

Abstract

Abstract This paper describes at first the present status of solar cell efficiencies prepared by Hot Wire CVD (HW-CVD), and then preparation techniques of μc-3C(cubic)-SiC developed for innovative solar cell applications by using HW-CVD method are presented. For preparing μc-3C-SiC, monomethylsilane (MMS) and hydrogen were used for reactant gases. The high conductivity of 5 S/cm could be achieved for N doped n-type μc-3C-SiC. For p-type, as-grown Al-doped μc-3C-SiC films showed a relatively high resistivity, but on thermal annealing, the conductivity increased to the level of 1 × 10− 2 S/cm. Monomethylgermane (MMG) and H2 were used to prepare μc-GeC thin films. μc-GeC thin films with a carbon composition of about 7–8% showed a clear shift of absorption coefficient spectra by 0.44 eV, when compared to crystalline Ge. The pin solar cell structures in which all p,i,n layers consist of μc-SiC have been prepared for the first time. It was found that μc-3C-SiC and μc-GeC are the promising candidates as the next generation thin-film solar cell materials, but at present, the film quality is strictly limited by the residual impurity concentration of filament material Re.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Carbide Semiconductor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.