Adhesion and interfacial structure of magnetron sputtered TiNi films on Si/SiO2 substrate
Source abstract
Abstract
Shape memory alloy TiNi films were prepared on Si and SiySiO by co-sputtering of TiNi target (Ti 50 at.% and Ni 50 at.%) 2 and Ti target (99.999 at.%).When comparing Si yTiNi with SiySiO yTiNi, the addition of SiO sandwich layer did not result in 22 significant change in the crystalline structures and shape memory properties.The SiO sandwich layer served as an effective 2 diffusion barrier in preventing formation of interfacial titanium silicide at the expense of film adhesion.As revealed by X-ray photoelectron spectroscopy, under the same conditions, the interfacial diffusion zone in Si yTiNi system was approximately 120 nm while in SiySiO yTiNi system the diffusion zone was only approximately 30 nm—a four-fold reduction in inter diffusion. 2 Meanwhile, the scratch adhesion testing registered a sharp drop in adhesion of the film from 170 mN in SiyTiNi system to 60 mN in SiySiO yTiNi system. 2
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Metal and Thin Film Mechanics · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.