article·2005-09-30

Atomic layer deposition and post-deposition annealing of PbTiO3 thin films

Jenni Harjuoja, Anne Kosola, Matti Putkonen, Lauri Niinistö

Publisher page

Abstract

Abstract Lead titanate thin films were deposited by atomic layer deposition on Si(100) using Ph 4 Pb and Ti(O- i -Pr) 4 as metal precursors and O 3 and H 2 O as oxygen sources. The influence of the Ti : Pb precursor pulsing ratio on the film growth, stoichiometry and quality was studied at two different temperatures, i.e. 250 and 300 °C. Uniform and stoichiometric films were obtained using a Ti : Pb precursor pulsing ratio of 1 : 10 at 250 °C or 1 : 28 at 300 °C. The as-deposited films were amorphous but the crystalline PbTiO 3 phase was obtained by rapid thermal annealing at 600–900 °C both in N 2 and O 2 ambient. Thin PbTiO 3 films were visually uniform and roughness values for as-deposited and annealed films were observed by atomic force microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Semiconductor materials and devices · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.