article·2004-12-13

A novel process to form a silica-like thin layer on polyethylene terephthalate film and its application for gas barrier

Peixin Zhu, Makoto Teranishi, Junhui Xiang, Yoshitake Masuda, Won‐Seon Seo, Kunihito Koumoto

Publisher page

Abstract

A novel process for polyethylene terephthalate (PET) surface modification with a silica-like thin layer is proposed. 3Aminopropyltrimethoxysilane was employed to react with acetone to form dimethyliminopropyltrimethoxysilane (DIPTMS) after aging for 10 days at room temperature. After hydrolysis of alkoxy groups in DIPTMS, dimethylimine-modified silica clusters occurred resulting in an increase of the solution viscosity. Consequently, a dense and homogeneous thin layer was easily dip-coated onto a PET film. After heat treatment at 150 8C, a smooth, flexible and transparent silica-like film (about 70 nm thick) was formed via dehydration and condensation. The surface of the PET dramatically changed from hydrophobic (water contact angle: 70F28) to hydrophilic (45F38). As an attempt for application, a dense film of lithium metasilicate (Li2Od 2SiO2d nH2O) was successfully prepared by dip coating on the modified PET film, which appeared very low oxygen permeability of about 0.17 cm 3 /m 2 day atm at 23 8C and 85% humidity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Synthesis and properties of polymers · Silicone and Siloxane Chemistry · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.