article·2004-09-21

Microstructural size effects on the hardness of nanocrystalline TiN/amorphous-SiNx coatings prepared by magnetron sputtering

Florian Kauffmann, Gerhard Dehm, V. Schier, A. Schattke, Thomas Beck, Stéphane Lang, Eduard Arzt

Publisher page

Abstract

It has been postulated that equiaxed nanocrystalline (<10 nm) TiN grains embedded in a thin amorphous silicon nitride (a-SiNx) phase are a prerequisite to obtain ultrahard TiN/a-SiNx coatings. The present study correlates hardness and microstructure of TiN/a-SiNx coatings with Si contents between 0 and 17 at.%. The coatings have been deposited by magnetron sputtering in industrial-scale physical vapour deposition systems. Transmission electron microscopy studies revealed that increasing the silicon content causes the TiN grain size to decrease. This is accompanied by a change in grain morphology: At Si contents lower than 1 at.% TiN grains become columnar, while at Si contents higher than 6 at.% equiaxed grains with diameters of 6 nm form. For silicon contents between 1 and 6 at.%, a transition region with nanocrystalline columnar grains exists. This nanocrystalline columnar microstructure causes maximum hardness values of more than 45 GPa for TiN/a-SiNx coatings as determined by nanoindentation. The elongated and equiaxed nanocrystalline TiN grains exhibit almost theoretical strength as dislocation-based deformation mechanisms are constrained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.