article·2001-07-01

Finite element modeling of the stresses, fracture and delamination during the indentation of hard elastic films on elastic–plastic soft substrates

Roberto Martins de Souza, G.G.W. Mustoe, John J. Moore

Publisher page

Abstract

In this work, the mechanical behavior of hard films on soft substrates was studied based on the finite element analysis of an indentation with normal forces. As an attempt to reproduce situations found in practice, defects were considered during the preparation of the finite element mesh, both in the film and at the interface. A sequence of steps was considered during the loading sequence applied in the models. Initially, the deposition (intrinsic) and thermal (extrinsic) stresses were introduced to account for all residual stresses present in thin films deposited by processes such as sputtering. Later, a normal load of 50 N was applied on the pre-stressed system. The effects of a crack that propagated along the film/substrate interface was studied directly, by calculating the normal and shear stresses that develop at the film surface and the film/substrate interface, and indirectly, by looking at the behavior of cracks located at the film surface and propagating perpendicular to the interface. The results indicated that the suppression of the constraint imposed by the interface resulted in a decrease in the stresses in the film. However, the crack at the interface apparently did not interact with the stresses responsible for the array of circular cracks usually observed at the contact edge of the indentation of coated systems with soft substrates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Numerical methods in engineering · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.