Formation mechanism for TiOx thin film obtained by remote plasma enhanced chemical vapor deposition in H2–O2 mixture gas plasma
Source abstract
Abstract
TiOx thin film formation mechanism from titanium tetraisopropoxide [Ti-(O-i-C3H7)4, TTIP] by remote plasma enhanced chemical vapor deposition (RPE-CVD) was investigated. Plasma was generated by a microwave discharge in single H2, O2, or H2–O2 mixture gases. Emission spectra measurements suggested that H radical atoms dissociated TTIP molecules. By addition of O2 to H2 gas, the H radical density and film deposition rate drastically increased. Moreover, it was proved that the deposition rate was decreased by OH radical molecules formed in H2–O2 mixture gas plasma. OH radical molecules caused deactivation of precursors and hence suppressed TiOTi bond formation in the gas phase. The highest deposition rate of 11 nm/min, which was two orders higher than that for the case of single gas plasma, was obtained in the case of mixture gas ratio of 80% H2 and 20% O2. The substrate temperature had not affected the deposition rate, but significantly changed the film structure. It is concluded that the use of H2–O2 mixture gas is effective for obtaining a high deposition rate for the RPE-CVD process, and the deposition rate strongly depends on H radical density and ratio of H and OH radical densities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.