article·2001-10-01

Low temperature chemical vapor deposition of tungsten carbide for copper diffusion barriers

Yong Sun, S.Y Lee, A.M Lemonds, Edward Engbrecht, S Veldman, J. G. Lozano, J.M. White, John G. Ekerdt, Ismail Emesh, Klaus Pfeifer

Publisher page

Abstract

Abstract Tungsten carbide films were grown by chemical vapor deposition using W(CO) 6 and C 2 H 4 between 250 and 450°C. Pyrolysis studies indicate W(CO) 6 thermally decomposes over the 150–200°C temperature range with or without ethylene. Carbon incorporation increased from 13 to ∼33% when C 2 H 4 was co-fed with W(CO) 6 . The W/C carbon ratio, as established by X-ray photoelectron spectroscopy (XPS), remained approximately 2:1 regardless of the C 2 H 4 to W(CO) 6 flow ratio for temperatures between 250° and 450°C. Films (50 nm thick) grown at 290°C have a resistivity of 250 μΩ-cm. Above 500°C, the W/C ratio decreased to ∼1:1.25 and the resistivity increased to 535 μΩ-cm. The tungsten and carbon are present in the tungsten carbide chemical state. X-Ray diffraction, XPS, selected area electron diffraction and transmission electron microscopy analysis reveal the films are a mixture of 5–6 nm W 2 C crystallites in an amorphous matrix, whose stoichiometry is ∼2:1 W/C. Copper was not found to diffuse through 7-nm-thick tungsten carbide films in Cu/WC/SiO 2 stacks that were annealed at 400°C for 8–9 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.