The effect of deposition parameters and substrate surface condition on texture, morphology and stress in magnetron-sputter-deposited Cu thin films
Source abstract
Abstract
Abstract Cu films, 5 and 500 nm thick, were sputtered onto amorphous SiO2 and Si3N4 substrates. The dependence of the film properties on the deposition pressure and the type and cleaning conditions of the substrate was investigated by Atomic Force Microscopy (AFM), Focused Ion Beam (FIB) Microscopy and X-ray diffraction (XRD). Cleaning the substrate leads to a smaller island size for the 5-nm-thick films, to the development of a columnar microstructure for the 500-nm-thick films and to a more pronounced {111} fiber texture for the Cu films on Si3N4 substrates. The tensile growth stress at the coalescence stage of the 5-nm-thick films reversed to compressive in the 500-nm-thick films owing to stress relief and to atomic peening. Sharper texture correlates with higher microstrain. Postdeposition annealing results in a more pronounced texture, grain growth and relaxation of the growth stress and the microstrain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.