Composition, structure, and nanomechanical properties of DC-sputtered CrNx (0≤x≤1) thin films
Source abstract
Abstract
Abstract CrNx (0≤x≤1) thin films were deposited on silicon (100) by DC reactive magnetron sputtering using a wide range of N2 partial pressures. Composition and crystal structure were determined by X-ray photoelectron spectroscopy and X-ray diffraction, respectively. Nanoindentation hardness and reduced modulus were measured using a Hysitron nanomechanical properties system. Annealing effects on structure and mechanical properties were studied. The presence of Cr, Cr2N and CrN (and mixtures of these phases) has been confirmed and related to the average film composition. With a small amount of N2 added (pN2∼0.5%) the strong Cr (110) peak disappears and the hardness of Cr increases significantly. Pure Cr2N was obtained for pN2 in the range of 7.5–9.5%, while pure CrN was obtained for pN2>20% of the total pressure. The highest hardness was obtained for pN2 in the range of 10–15% of the total pressure. During annealing (400°C, 2 h), a Cr2N (111) texture appeared for pN2 in the range of 0.5–10.0% of the total pressure. The hardness and modulus of Cr, Cr2N and CrN increased after annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.