article·2004-04-23

The nanoindentation behaviour of hard and soft films on silicon substrates

D. Beegan, S. Chowdhury, M. T. Laugier

Publisher page

Abstract

Abstract Carbon nitride and copper films of thickness 550 and 400 nm, respectively have been sputter deposited on silicon substrates. The indentation behaviour of these films is investigated by analysis of the load-displacement curves and by imaging of the residual indents. The Oliver and Pharr method is used to calculate the hardness from the load-displacement curve, while the contact area measured by atomic force microscopy is used in the traditional hardness equation: H = P / A . The carbon nitride films exhibited neither pile-up nor sink-in behaviour and the hardnesses determined by both methods are very similar. The copper films showed pile-up at the indent edges at nearly all loads, and there is then a large difference between the hardness values measured by the two methods. Both films show the effect of the substrate on the hardness values as the indentation depth increases. In order to distinguish the “true” film hardness from the measured composite hardness, Korsunksy's composite hardness model is applied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.