article·2003-07-07

Micro-Raman spectroscopy study of surface transformations induced by excimer laser irradiation of TiO2

Toussaint D. Robert, L.D. Laude, Viktor M. Geskin, Roberto Lazzaroni, R. Gouttebaron

Publisher page

Abstract

Abstract Pressed disks of TiO2 powder particles (≈1 μm in size) have been irradiated with a pulsed KrF (248 nm) excimer laser source at fluences between 0.1 and 1 J cm−2. Surface films (1.5–2 μm thick) have been studied by Raman microprobe spectroscopy and atomic force microscopy (AFM). The Raman study reveals a three-layer structure for the irradiated anatase powders. A dark layer of reduced oxide is sandwiched between a top coating of molten/resolidified rutile and an underlying defective, slightly oxygen-deficient mixed-phase of rutile and anatase. AFM measurements indicate that a smooth surface layer coexisting with the initial rough grain morphology gradually appears with increasing fluence. At low fluence, anatase is reduced in a dark film and further transformed into rutile. At intermediate fluence, a shiny coating of resolidified stoichiometric rutile forms on the dark film. It gets thicker as the fluence increases while darkening of the sublayer intensifies up to a maximum of approximately 700 mJ cm−2. At high fluence, however, melting and re-oxidation (and eventually ablation) prevail over reduction; the whole layer turns into a greyish crust of mostly resolidified rutile in non-ablated regions. A physico-chemical mechanism is proposed to explain the in-depth distribution of the various components as a function of fluence.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser-induced spectroscopy and plasma · Electronic and Structural Properties of Oxides · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.