journal article·2004-03

Tip-radius effect in finite element modeling of sub-50 nm shallow nanoindentation

Ning Yu, Andreas A. Polycarpou, Thomas F. Conry

Thin Solid Films· Volume 450· Issue 2
Publisher page

Abstract

An accurate representation of the indenter geometry is essential for correct finite element simulations of shallow indentations of less than 50 nm using a 90° cube-corner indenter. A nonlinear regression method for estimating the tip radius of an indenter is presented, which takes into account that initially the contact is only with the spherical surface of the tip and subsequently also includes contact with the equivalent conical surface. The tip radius of a Berkovich indenter is estimated by a finite element modeling (FEM) best-fitting method. Using the estimates of tip radii, the yield strength of gold in the film of a gold/silicon system was estimated from the best fit between FEM simulations and nanoindentation experiments using the 90° cube corner indenter, which compared favorably with an FEM simulation and nanoindentation data using a Berkovich indenter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Pethica · Philos. Mag. A · 1983 · 48 · 59310.1080/01418618308234914 ↗
2. Doerner · J. Mater. Res. · 1986 · 1 · 60110.1557/JMR.1986.0601 ↗
3. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
4. Whitehead · Thin Solid Films · 1992 · 220 · 27710.1016/0040-6090(92)90585-Y ↗
5. Hainsworth · J. Mater. Res. · 1996 · 11 · 198410.1557/JMR.1996.0250 ↗
6. Lu · J. Appl. Phys. · 1999 · 85 · 264210.1063/1.369581 ↗
7. Li · J. Eng. Mater. Technol. · 1998 · 120 · 15410.1115/1.2807005 ↗
8. Tsui · J. Mater. Res. · 1999 · 14 · 29210.1557/JMR.1999.0042 ↗
9. Bhattacharya · Int. J. Solids Struct. · 1988 · 24 · 88110.1016/0020-7683(88)90039-X ↗
10. Lichinchi · Thin Solid Films · 1998 · 312 · 24010.1016/S0040-6090(97)00739-6 ↗
11. Knapp · J. Appl. Phys. · 1999 · 85 · 146010.1063/1.369178 ↗
12. Chen · J. Mater. Res. · 2001 · 16 · 297410.1557/JMR.2001.0408 ↗
13. Pelletier · Thin Solid Films · 2000 · 379 · 14710.1016/S0040-6090(00)01559-5 ↗
14. Bouzakis · Surf. Coat. Technol. · 2001 · 142–144 · 10210.1016/S0257-8972(01)01275-0 ↗
15. McElhaney · J. Mater. Res. · 1998 · 13 · 130010.1557/JMR.1998.0185 ↗
16. Shih · J. Mater. Res. · 1991 · 6 · 262310.1557/JMR.1991.2623 ↗
17. Shimamoto · Philos. Mag. A · 1996 · 74 · 109710.1080/01418619608239710 ↗
18. King · Int. J. Solids Struct. · 1987 · 23 · 165710.1016/0020-7683(87)90116-8 ↗
19. Edlinger · Eur. J. Mech. A/Solids · 1993 · 12 · 679
20. L. Kuhn, Technical Note NRL-S-012, Hysitron Inc, Minneapolis, MN, 1999
21. Sun · Philos. Mag. Lett. · 1999 · 79 · 64910.1080/095008399176698 ↗
22. Xin · Proc. SPIE · 2000 · 4102 · 11210.1117/12.405275 ↗
23. Hay · J. Mater. Res. · 1999 · 14 · 229610.1557/JMR.1999.0306 ↗
24. Williams · J. Mater. Res. · 1999 · 14 · 233810.1557/JMR.1999.0310 ↗
25. Callister · 2000
26. Lubliner · 1990
27. Volinsky · Acta Mater. · 2002 · 50 · 44110.1016/S1359-6454(01)00354-8 ↗