Irradiation of the amorphous carbon films by picosecond laser pulses
Source abstract
Abstract
Abstract The effect of a picosecond laser irradiation on structure modification of diamond-like carbon (DLC) and graphite-like carbon (GLC) films was analyzed in this work. The DLC films were irradiated by Nd:YVO4 laser operating at the 532 nm wavelength with the picosecond (10 ps) pulse duration at the fluence in the range of (0.08–0.76) J/cm2. The GLC films were irradiated only at the fluence of 0.76 J/cm2. The different pulse number (1, 10, and 100) was used for irradiation the films. The micro-Raman spectroscopy measurements indicated that the laser irradiation led to rearrangement of the sp3 C–C bonds to the sp2 C C bonds in the DLC films. The formation of silicon carbide (SiC) was found in the irradiated spot after 10 and 100 pulses. Modifications in the structure of the DLC film took place even in the areas with low intensity of the Gaussian beam wings (heat affected areas). The increase in the oxygen concentration up to ten times was detected in the heat affected areas after 100 pulses. Opposite to that, the laser irradiation decreased the oxygen concentration and smoothened the surface microrelief of the GLC films. The bonding type remained unchanged in the GLC films even after irradiation with 100 pulses per spot.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Laser Material Processing Techniques · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
2. Luisa torsi, NOx sensing one- and two-dimensional carbon nanostructures and nanohybrids: progress and perspectives10.1016/j.snb.2013.01.089 ↗
3. Jelinek · Mater. Sci. Eng. B · 2010 · 169 · 8910.1016/j.mseb.2010.01.010 ↗
4. Patterning of highly oriented pyrolytic graphite and glassy carbon surfaces by nanolithography and oxygen plasma etching10.1016/j.carbon.2009.01.018 ↗
5. Diffraction gratings fabricated in DLC thin films10.1016/j.surfcoat.2010.02.037 ↗
6. Vertical nanostructure arrays by plasma etching for applications in biology, energy, and electronics10.1016/j.nantod.2013.04.008 ↗
7. The physics of ultra-short laser interaction with solids at non-relativistic intensities10.1016/j.physrep.2011.07.002 ↗
8. Laser nano-manufacturing — state of the art and challenges10.1016/j.cirp.2011.05.005 ↗
9. Photosensitivity and optical performance of hydrogenated amorphous carbon films processed by picosecond laser beams10.1016/j.surfcoat.2011.02.019 ↗
10. Nanoscale ablation on patterned diamondlike carbon films with femtosecond laser pulses10.1063/1.2784966 ↗
11. The pairing-dependent effects of laser surface texturing on micro tribological behavior of amorphous carbon film10.1016/j.wear.2011.08.008 ↗
12. Surface modification of thin tetrahedral amorphous carbon films by means of UV direct laser interference patterning10.1016/j.diamond.2010.10.003 ↗
13. Nanosecond UV laser graphitization and delamination of thin tetrahedral amorphous carbon films with different sp3/sp2 content10.1016/j.tsf.2011.01.338 ↗
14. Laser ablation behavior and mechanism of C/SiC composite10.1016/j.ceramint.2013.02.012 ↗
15. Effects of pulse duration in laser processing of diamond-like carbon films10.1016/j.diamond.2005.02.009 ↗
16. An explanation for laser-induced spallation effect in a-C:H films: altered phase evolution route caused by hydrogen doping10.1063/1.3528223 ↗
17. Modification of the amorphous carbon films by the ns-laser irradiation
18. Irradiation of the graphite-like carbon films by ns-laser pulse10.1016/j.apsusc.2012.08.042 ↗
19. Kinetic modeling of laser annealing processes in a-C:H films10.1016/j.vacuum.2011.01.001 ↗
20. Control of tribological properties of diamond-like carbon films with femtosecond-laser-induced nanostructuring10.1016/j.apsusc.2007.09.037 ↗
21. Femtosecond-laser-induced nanostructure formation and surface modification of diamond-like carbon films10.1016/j.electacta.2007.02.072 ↗
22. A new method to determine laser damage threshold for thin diamond-like carbon films on silicon10.1016/S0925-9635(99)00272-1 ↗
23. Reduction of graphite oxide to grapheme with laser irradiation10.1016/j.carbon.2012.10.017 ↗
24. Laser induced graphite oxide/graphene transformation10.2961/jlmn.2012.01.0009 ↗
25. Frictional properties of diamond-like carbon, glassy carbon and nitrides with femtosecond-laser-induced nanostructure10.1016/j.diamond.2011.02.010 ↗
26. Influence of process parameters on structure of carbon coatings deposited at atmospheric pressuse
27. Quantitative analysis of hydrogenated diamondlike carbon films by visible Raman spectroscopy10.1063/1.2219983 ↗
28. Characteization of amorphous and nanocrystalline carbon films10.1016/j.matchemphys.2005.07.048 ↗
29. Structural and tribological characteristics of diamond-like carbon films deposited by pulsed laser ablation10.1016/S0921-5107(00)00434-7 ↗
30. Raman characterisation of PIII multilayer carbon films10.1016/j.diamond.2004.01.028 ↗
31. Vibrational dynamics and structure of graphitic amorphous carbon modeled using an embedded-ring approach10.1103/PhysRevB.51.196 ↗
32. Microstructure of highly crystalline silicon carbide thin films grown by HWCVD technique10.1016/j.tsf.2007.06.055 ↗
33. Silicon rich silicon oxide films deposited by radio frequency plasma enhanced chemical vapor deposition method: optical and structural properties10.1016/j.apsusc.2011.05.112 ↗
34. Raman spectroscopy of silicon-nanocrystals fabricated by inductively coupled plasma chemical vapor deposition10.1016/j.physe.2013.03.019 ↗