Titanium oxynitride thin films by the reactive sputtering process with an independent pulsing of O2 and N2 gases
Source abstract
Abstract
Titanium oxynitride thin films are deposited by DC reactive magnetron sputtering. A pure titanium target is sputtered in a reactive atmosphere composed of argon, oxygen and nitrogen gases. The oxygen mass flow rate as well as that of the nitrogen gas are both pulsed during the deposition time using an independent and rectangular signal for each reactive gas. A constant pulsing period T = 45 s is applied for both reactive gases and a delay time δ of 34 s between N2 and O2 injection times is set for all depositions. Oxygen and nitrogen duty cycles are systematically and independently changed from 0 to 100% of their pulsing period. From real time measurements of the Ti target potential and total sputtering pressure, it is shown that the reactive process alternates between oxidized, nitrided and elemental sputtering modes as a function of the oxygen and nitrogen injection times. The full poisoning of the Ti target surface by oxygen and/or nitrogen can be avoided for some given ranges of O2 and N2 duty cycles. Deposition rates of titanium oxynitride films are substantially enhanced and can be adjusted between that of pure Ti and TiN films with a gradual transition of their electrical conductivity and optical transmittance in the visible range. These results support that titanium oxynitride compounds exhibiting absorbent to transparent behaviors can be precisely sputter-deposited by means of a two reactive gases pulsing process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · ZnO doping and properties · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Advances in dielectric thin films for energy storage applications, revealing the promise of group IV binary oxides10.1021/acsenergylett.1c00313 ↗
2. Sputter deposition of transition -metal carbide thin films – A critical review from a chemical perspective10.1016/j.tsf.2013.02.019 ↗
3. Modified embedded-atom method interatomic potentials for the Ti-C and Ti-N binary systems10.1016/j.actamat.2008.03.027 ↗
4. Review of transition-metal diboride thin films10.1016/j.vacuum.2021.110567 ↗
5. Deposition and characterization of ternary thin films within the Ti-Al-C system DC magnetron sputtering10.1016/j.jcrysgro.2006.03.008 ↗
6. Comparison of Al-Si-N nanocomposite coatings deposited by HIPIMS and DC magnetron sputtering10.1016/j.surfcoat.2013.06.076 ↗
7. Reactively sputtered Ti-B-N nanocomposite films: correlation between structure and optical properties10.1016/S0040-6090(02)00071-8 ↗
8. Transparent conducting oxide semiconductors for transparent electrodes10.1088/0268-1242/20/4/004 ↗
9. Solution-processed ternary alloy aluminum yttrium oxide dielectric for high performance indium zinc oxide thin-film transistors10.1016/j.jallcom.2018.01.249 ↗
10. Formation of ternary nitride thin films by magnetron sputtering co-deposition10.1016/j.surfcoat.2006.08.100 ↗
11. Reactive magnetron cosputtering of hard and conductive ternary nitride thin films: ti-Zr-N and Ti-Ta-N. J. Vac
12. Structural investigation of thin films of Ti1-xAlxN ternary nitrides using Ti K-edge X-ray absorption fine structure10.1016/j.surfcoat.2006.09.095 ↗
13. Model approximation and stabilization of reactive sputter processes10.1016/j.jprocont.2018.06.009 ↗
14. Structural, optical and mechanical properties of coloured TiNxOy thin films10.1016/S0040-6090(03)01123-4 ↗
15. Hysteresis effects in the sputtering process using 2 reactive gases10.1016/0040-6090(94)06501-2 ↗
16. Instabilities of the reactive sputtering process involving one metallic target and two reactive gases10.1116/1.581953 ↗
17. Correlation between processing and properties of TiOxNy thin films sputter deposited by the reactive gas pulsing technique10.1016/S0169-4332(01)00774-7 ↗
18. Effect of RGPP process on properties of Cr-Si-N coatings10.1179/1743294414Y.0000000280 ↗
19. Nitrogen gas pulsing to modify properties of TiNx thin films sputter deposited10.1023/A:1020600502303 ↗
20. Enhanced sputtering of titanium oxide, nitride and oxynitride thin films by the reactive gas pulsing technique10.1016/S0257-8972(01)01149-5 ↗
21. Structural investigations of iron oxynitride multilayered films obtained by the reactive gas pulsing process10.1016/j.surfcoat.2015.04.010 ↗
22. Reactive gas pulsing process, a promising technique to elaborate silicon oxynitride multilayer nanometric antireflective coatings10.1088/1361-6463/50/1/015306 ↗
23. Reactive sputtering of TiOxNy coatings by the reactive gas pulsing process – Part I : pattern and period of pulses10.1016/j.surfcoat.2007.03.002 ↗
24. Precise control of multilayered structures of Nb-O-N thin films by the use of reactive gas pulsing process in DC magnetron sputtering10.1016/j.surfcoat.2007.08.007 ↗
25. Optical, electrical and mechanical properties of the tantalum oxynitride thin films deposited by pulsing reactive gas sputtering10.1016/j.tsf.2006.07.054 ↗
26. Influence of air oxidation on the properties of decorative NbOxNy coatings prepared by gas pulsing10.1016/j.surfcoat.2007.09.015 ↗
27. ZrOxNy decorative thin films prepared by the reactive gas pulsing process10.1088/0022-3727/42/19/195501 ↗
28. Reactive gas pulsing process: a method to extend the composition range in sputtered iron oxynitride films10.1016/j.surfcoat.2008.04.064 ↗
29. Reactive sputtering of TiOxNy coatings by the reactive gas pulsing process – Part II : the role of the duty cycle10.1016/j.surfcoat.2007.03.021 ↗
30. Modelling of reactive sputtering involving two separated metallic targets10.1016/S0257-8972(99)00051-1 ↗
31. Upgrading the “Berg-model” for reactive sputtering processes10.1016/j.tsf.2014.02.063 ↗
32. Target poisoning during reactive magnetron sputtering: part I: the influence of ion implantation10.1016/j.surfcoat.2003.10.006 ↗
33. Modeling of the target surface modification by reactive ion implantation during magnetron sputtering10.1116/1.1705641 ↗
34. The reactive gas pulsing process for tuneable properties of sputter deposited titanium oxide, nitride and oxynitride coatings10.1504/IJMPT.2010.034268 ↗