Comparison of electrical sensing and image analysis for in situ transmission electron microscopy nanomechanical testing of thin films
Source abstract
Abstract
Highlight • An in situ transmission electron microscopy device uses imaging for measuring stress and strain. • The noise level is improved compared to a similar device using capacitive sensing. • Digital image correlation is used to measure local normal strain values. • The device can be used to perform monotonic and transient tests. An in situ transmission electron microscopy (TEM) microelectromechanical system (MEMS) device has been designed to utilize TEM imaging for measuring stress and strain of thin film micro-specimens while simultaneously recording the microstructure evolution. Digital image correlation is also used to measure local normal strain values by tracking edge features of the specimens. The device performance is compared to that of a similar MEMS device that utilizes capacitive sensors for stress and strain measurements, using 100-nm thick Au thin film specimens. It is shown that there is a significant improvement in the noise levels from ∼1–2 MPa to ∼0.2 MPa and increased sensitivity with the capability of measuring small stress changes. The device can be used to perform both in situ TEM monotonic and transient tests (for activation volume measurements) to investigate the active plastic deformation mechanisms.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Force Microscopy Techniques and Applications · Nanowire Synthesis and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.