Structured SiCu thin films in LiB as anodes
Source abstract
Abstract
Abstract Both helical and inclined columnar Si–10 at.% Cu structured thin films were deposited on Cu substrates using glancing angle deposition (GLAD) technique. In order to deposit Cu and Si two evaporation sources were used. Ion assistance was utilized in the first 5 min of the GLAD to enhance the adhesion and the density of the films. These films were characterized by thin film XRD, GDOES, SEM, and EDS. Electrochemical characterizations were made by testing the thin films as anodes in half-cells for 100 cycles. The results showed that the columnar SiCu thin film delivered 2200 mAh g − 1 , where the helical one exhibited 2600 mAh g − 1 , and, their initial coulombic efficiencies were found to be 38%–50% respectively. For the columnar and the helical thin film anodes, sustainable 520 and 800 mAh g − 1 with 90% and 99% coulombic efficiencies were achieved for 100 cycles. These sustainable capacities showed the importance of the thin film structure having nano-sized crystals and amorphous particles. The higher surface area of the helices increases the capacity of the electrode because the contact area of the thin film anode with Li ions is increased, and the polarization which otherwise forms on the anode surface due to SEI formation is decreased. In addition, because of larger interspaces between the helices the ability of the anode to accommodate the volumetric changes is improved, which results in a higher coulombic efficiency and capacity retention during cycling test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Silicon and silicon–copper composite nanorods for anodes of Li-ion rechargeable batteries10.1016/j.jpowsour.2011.07.022 ↗
2. Silicon‐based nanomaterials for lithium‐ion batteries: a review10.1002/aenm.201300882 ↗
3. Managing voids of Si anodes in lithium ion batteries10.1039/c3nr03197g ↗
4. Multilayered Si/Ni nanosprings and their magnetic properties10.1002/smll.200600375 ↗
5. Oxidic nanotubes and nanorods—anisotropic modules for a future nanotechnology10.1002/1521-3773(20020715)41:14<2446::AID-ANIE2446>3.0.CO;2-K ↗
6. Nanostructure fabrication using electron beam and its application to nanometer devices10.1109/5.573752 ↗
7. Nanomaterials: a membrane-based synthetic approach10.1126/science.266.5193.1961 ↗
8. Manipulating the column tilt angles of nanocolumnar films by glancing-angle deposition
9. First thin film realization of a helicoidal bianisotropic medium10.1116/1.579626 ↗
10. Engineered sculptured nematic thin films10.1116/1.580621 ↗
11. Uniform Si nanostructures grown by oblique angle deposition with substrate swing rotation10.1088/0957-4484/16/9/052 ↗
12. Stress reduction in tungsten films using nanostructured compliant layers10.1063/1.1803106 ↗
13. Mechanical response of thin films with helical microstructures10.1116/1.590887 ↗
14. Magnetic domains in Co thin films obliquely sputtered on a polymer substrate10.1103/PhysRevB.63.174441 ↗
15. Size dependent fracture of Si nanowire battery anodes10.1016/j.jmps.2011.06.003 ↗
16. Glancing angle deposition
17. Structural considerations of intermetallic electrodes for lithium batteries10.1016/S0378-7753(02)00538-4 ↗
18. Advanced multi-component nanostructures designed by dynamic shadowing growth10.1039/c1nr10103j ↗
19. Designing nanostructures by glancing angle deposition10.1117/12.505253 ↗
20. Metal oxide morphology in argon-assisted glancing angle deposition10.1116/1.3687204 ↗
21. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
22. The crystal structural evolution of nano-Si anode caused by lithium insertion and extraction at room temperature10.1016/S0167-2738(00)00362-3 ↗
23. Electrochemically-driven solid-state amorphization in lithium-metal anodes10.1016/S0378-7753(03)00303-3 ↗
24. Electrochemically-driven solid-state amorphization in lithium–silicon alloys and implications for lithium storage10.1016/S1359-6454(02)00514-1 ↗
25. Low temperature gettering of Cu, Ag, and Au across a wafer of Si by Al
26. A nanosized silicon thin film as high capacity anode material for Li-ion rechargeable batteries10.1016/j.mseb.2006.04.008 ↗
27. Reversible cycling of crystalline silicon powder10.1149/1.2402112 ↗
28. The roles of intermediate phases of Li–Si alloy as anode materials for lithium-ion batteries10.1016/S1875-5372(11)60003-9 ↗
29. An in situ X-ray diffraction study of the reaction of Li with crystalline Si10.1149/1.2409862 ↗
30. Impedance analysis of silicon nanowire lithium ion battery anodes10.1021/jp901594g ↗
31. Comparison of kinetic properties of LiCoO2 and LiTi0.05Mg0.05Ni0.7Co0.2O2 by impedance spectroscopy10.1016/S0167-2738(03)00150-4 ↗
32. Silicon nanotube battery anodes10.1021/nl902058c ↗
33. The use of well aligned composite nanorod arrays as anode material for lithium rechargeable batteries10.1016/j.jpowsour.2014.05.006 ↗
34. Electrochemical impedance study of initial lithium ion intercalation into graphite powders10.1016/S0013-4686(00)00782-9 ↗
35. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling10.1016/j.jpowsour.2010.07.071 ↗
36. Low temperature synthesis of a stable MoO2 as suitable anode materials for lithium batteries10.1016/j.mseb.2005.03.027 ↗