Studies of annealing impact on the morphological, opto-dielectric and mechanical behaviors of molybdenum-doped CrN coatings
Source abstract
Abstract
In the present study, molybdenum doped chromium nitride coatings deposited onto silicon substrates via unbalanced magnetron sputtering, in as-deposited and annealed conditions, at 500–800 °C in steps of 100 °C, were studied to reveal their temperature dependent structural, morphological, optical and mechanical behaviors. An analysis of these features was carried out using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), ultraviolet visible (UV–Vis) spectroscopy, nanoindentation and finite element modeling (FEM) techniques. XRD results exhibited a significant improvement in the crystallinity of the Molybdenum (Mo)-doped chromium nitride (CrN) coatings along (111) and (200) diffraction planes, as the annealing temperatures increased. The lattice parameters gradually decreased from 4.20 to 4.12 A as the temperature increased. The same tendency was also observed for lattice microstrains and residual stresses. Smooth grain-like surfaces were observed by FESEM imaging techniques. At an annealing temperature of 700 °C, the spectral absorptance of Mo:CrN films attained its peak value (86%), whereas the energy band-gaps were reduced from 2.48 to 1.14 eV. The other optical parameters such as complex dielectric constants, Urbach energy values, and steepness parameters of these coatings were also discussed. The hardness and elastic modulus of the as-deposited Mo:CrN films were estimated to be 18.4 and 287 GPa, respectively. At a film thickness of 1.0 μm, the highest stress of 20 GPa was evaluated, via FEM studies, at the interface between the film and the substrate. As the film thickness was enhanced, the stress level decreased. At higher annealing temperatures, both the mechanical hardness (H) and the elastic modulus (E) of Mo-doped CrN coatings dwindled.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · GaN-based semiconductor devices and materials · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Low temperature deposition of Cr(N)/TiO2 coatings using a duplex process of unbalanced magnetron sputtering and micro-arc oxidation10.1016/S0257-8972(00)00953-1 ↗
2. Nano Cr interlayered CrN coatings on steels10.1016/S1007-0214(05)70137-1 ↗
3. Structural characterization of pulsed laser-deposited AlN thin films on semiconductor substrates10.1016/S0040-6090(97)00674-3 ↗
4. Surface hardness prediction of CrN thin film coating on AL7075-T6 alloy using fuzzy logic system10.1007/s12541-013-0063-5 ↗
5. Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review10.1016/S0921-5093(02)00259-9 ↗
6. Stress and preferred orientation in nitride-based PVD coatings10.1016/j.surfcoat.2007.08.029 ↗
7. Thermal stablility and oxidation resistance of CrAlSiN nano-structured coatings deposited by lateral rotating cathode arc10.4028/www.scientific.net/KEM.447-448.725 ↗
8. Mechanical and tribological properties of compositionally graded CrAlN films deposited by AC reactive magnetron sputtering10.1016/j.surfcoat.2007.07.060 ↗
9. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
10. A novel duplex PDMS/CrN coating with superior corrosion resistance for marine applications10.1039/C6RA19729A ↗
11. Structure, mechanical and tribological properties of CrN thick coatings deposited by circular combined tubular arc ion plating10.1016/j.surfcoat.2012.04.041 ↗
12. Microstructure and cutting performance of CrTiAlN coating for high-speed dry milling10.1016/S1003-6326(14)63256-8 ↗
13. Nanoindentation study of magnetron-sputtered CrN and CrSiN coatings10.1016/j.matdes.2011.01.031 ↗
14. Tribological and electrochemical properties of Cr-Si-C-N coatings in artificial seawater10.1039/C6RA19243B ↗
15. (Cr1-xAlx)N: a comparison of direct current, middle frequency pulsed and high power pulsed magnetron sputtering for injection molding components10.1016/j.tsf.2012.08.056 ↗
16. Comparison study on structure of Si and Cu doping CrN films by reactive sputtering10.1016/j.apsusc.2011.01.052 ↗
17. Oxidation resistance of CrN/(Cr,V)N hard coatings deposited by DC magnetron sputtering10.1016/j.tsf.2015.05.010 ↗
18. Characterisation and wear properties of industrially produced nanoscaled CrN/NbN multilayer coating10.1016/j.surfcoat.2004.08.069 ↗
19. Mechanical, microstructural and tribological properties of reactive magnetron sputtered Cr–Mo–N films10.1016/j.jmst.2014.10.001 ↗
20. Comparative studies on microstructure and mechanical properties of CrN, Cr–C–N and Cr–Mo–N coatings10.1016/j.jmatprotec.2006.11.090 ↗
21. Comparative studies on Mo-Cr-N and A1-Cr-N coatings obtained by PVD dual magnetron sputtering10.1002/ppap.200930406 ↗
22. Effect of bias voltage on microstructure and phase evolution of Cr–Mo–N coatings by an arc bonded sputter system10.1016/j.ceramint.2015.12.048 ↗
23. A comparative study of the oxidation behavior of Cr2N and CrN coatings10.1016/j.tsf.2013.01.031 ↗
24. Syntheses and mechanical properties of Cr–Mo–N coatings by a hybrid coating system10.1016/j.surfcoat.2006.08.098 ↗
25. A hybrid density functional study on the visible light photocatalytic activity of (Mo,Cr)-N codoped KNbO310.1039/C5CP04365D ↗
26. Composition driven phase evolution and mechanical properties of Mo-Cr-N hard coatings10.1063/1.4926734 ↗
27. Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications10.1016/j.apsusc.2018.01.267 ↗
28. Annealing effects on microstructural, optical, and mechanical properties of sputtered CrN thin film coatings: experimental studies and finite element modeling10.1016/j.jallcom.2018.04.012 ↗
29. Solution-chemical derived nickel–alumina coatings for thermal solar absorbers10.1016/S0038-092X(03)00199-3 ↗
30. Liang · Adv. Funct. Mater. · 2011 · 21 · 377810.1002/adfm.201101072 ↗
31. Designing superhard, self-toughening CrAlN coatings through grain boundary engineering10.1016/j.actamat.2012.06.049 ↗
32. Nanoindentation of hard multilayer coatings: finite element modelling10.1016/j.msea.2010.09.073 ↗
33. Deposition and characterisation of Mo2N/CrN multilayer coatings prepared by cathodic arc evaporation10.1016/j.surfcoat.2015.08.042 ↗
34. Spectral properties and thermal stability of CrN/CrON/Al2O3 spectrally selective coating10.1016/j.tsf.2016.06.055 ↗
35. Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN–CrAlON based tandem absorber10.1016/j.solmat.2015.02.010 ↗
36. Effect of annealing temperature on tribological properties and material transfer phenomena of CrN and CrAlN coatings10.1007/s11665-013-0748-z ↗
37. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
38. Experimental and predicted mechanical properties of Cr1−xAIxN thin films, at high temperatures, incorporating in situ synchrotron radiation X-ray diffraction and computational modelling10.1039/C7RA00342K ↗
39. Cohen · 1987
40. Effect of thermal treatments on the structure of MoNxOy thin films10.1016/j.vacuum.2008.03.015 ↗
41. Effect of Mo content on the structural and mechanical properties of CrMoN/MoS2 composite coatings10.1016/S1875-5372(14)60055-2 ↗
42. High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy10.1016/S0022-3697(00)00215-8 ↗
43. Degradation of CrN films at high temperature under controlled atmosphere10.1116/1.1566784 ↗
44. Oxidation behavior of chromium nitride films10.1016/j.tsf.2006.06.039 ↗
45. Decomposition of N2O over the surface of cobalt spinel: a DFT account of reactivity experiments10.1016/j.cattod.2008.02.027 ↗
46. Effects of annealing temperatures on the morphological, mechanical, surface chemical bonding, and solar selectivity properties of sputtered TiAlSiN thin films10.1016/j.jallcom.2016.02.077 ↗
47. Structural and optical characteristics of pre- and post-annealed sol-gel derived CoCu-oxide coatings10.1016/j.jallcom.2017.01.079 ↗
48. Solar absorptance of copper–cobalt oxide thin film coatings with nano-size, grain-like morphology: optimization and synchrotron radiation XPS studies10.1016/j.apsusc.2013.01.081 ↗
49. Chemical bonding states and solar selective characteristics of unbalanced magnetron sputtered TixM1-x-yNy films10.1039/C6RA02550A ↗
50. Optical and mechanical characterization of novel cobalt-based metal oxide thin films synthesized using sol-gel dip-coating method10.1016/j.surfcoat.2012.07.028 ↗
51. Sol-gel derived nanocomposites for optical applications10.1002/adem.201000116 ↗
52. Characterization of Al/Al2O3/NiOx solar absorber obtained by spray pyrolysis10.1016/j.solidstatesciences.2010.05.028 ↗
53. Optical characterization of tandem absorber/reflector systems based on titanium oxide-carbon coatings10.1016/j.solmat.2007.04.005 ↗
54. Understanding the shrinkage of optical absorption edges of nanostructured Cd-Zn sulphide films for photothermal applications10.1016/j.apsusc.2016.09.095 ↗
55. Structural and optical properties of plasma polymerized pyromucic aldehyde thin films
56. Review of sol-gel derived mixed metal oxide thin film coatings with the addition of carbon materials for selective surface applications10.1166/jap.2014.1131 ↗
57. Structural thermal stability of graphene oxide-doped copper–cobalt oxide coatings as a solar selective surface10.1016/j.jmst.2016.09.002 ↗
58. Investigation of the post-annealing electromagnetic response of Cu–Co oxide coatings via optical measurement and computational modelling10.1039/C6RA25626K ↗
59. Influence of annealing temperature on photoluminescence properties and optical constants of N-doped ZnO thin films grown on muscovite mica substrates10.1016/j.physb.2015.07.009 ↗
60. Effects of substrate temperature on the optical and electrical properties of Al:ZnO films10.1088/0268-1242/23/8/085019 ↗
61. Studies on dielectric properties, opto-electrical parameters and electronic polarizability of thermally evaporated amorphous Cd50S50−xSex thin films10.1016/j.jallcom.2016.02.126 ↗
62. Influence of composition on optical and dispersion parameters of thermally evaporated non-crystalline Cd50S50−xSex thin films10.1016/j.jallcom.2015.06.231 ↗
63. Effects of post-thermal annealing on the optical constants of ZnO thin film10.1016/j.jallcom.2006.10.076 ↗
64. Tailoring the physicochemical and mechanical properties of optical copper–cobalt oxide thin films through annealing treatment10.1016/j.surfcoat.2013.11.044 ↗
65. Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films10.1016/j.apsusc.2011.04.088 ↗
66. Contact damage evolution in a diamond-like carbon (DLC) coating on a stainless steel substrate10.1016/j.tsf.2006.01.035 ↗