journal article·2018-11Open access

Immobilization of carboxylic acid groups on polymeric substrates by plasma-enhanced chemical vapor or atmospheric pressure plasma deposition of acetic acid

Wei-Yu Chen, Allan Matthews, Frank R. Jones, Ko-Shao Chen

Thin Solid Films· Volume 666

Abstract

Low-pressure plasma-enhanced chemical vapor deposition (PECVD) is a process that activates the precursor in the plasma state to deposit films on the surface. Introducing carboxylic acid functional groups via PECVD has been widely applied in various applications, such as the enhancement of interfacial adhesion between fillers and matrices in composite materials, molecular grafting for biosensors and biocompatibility improvement. To develop a compatible surface for cell adhesion, polymeric substrates, poly (lactic acid) (PLA) and polyethylene terephthalate (PET), were modified by a low-pressure acetic acid plasma to improve surface hydrophilicity and biocompatibility. The acetic acid plasma deposited film maintained stability on a hydrophilic surface for long-term aging. If the acetic acid film can be deposited by process using atmospheric pressure plasma (APP), a more rapid, economic and power-saving method can be achieved. In this study, a remote APP system using a bespoke Pyrex APP chamber was utilized to deposit acetic acid film onto the surfaces of polymeric substrates. The wettability, stability of hydrophilicity and surface elemental composition of the APP-deposited film were reported and compared with that prepared via low-pressure acetic acid plasma. The plasma functionalized PET showed good stability and a long-term hydrophilicity. Although the plasma processes are able to tailor the PLA surface into hydrophilic with the presence of carboxylic acid functional group, the surface is not stable due to hydrolytic degradation of PLA structure and lost its hydrophilicity after 3 days.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Block-copolymers of L-lactide and poly(ethylene glycol) for biomedical applications10.1007/BF00058953 ↗
2. Maximal migration of human smooth-muscle cells on fibronectin and type-IV collagen occurs at an intermediate attachment strength10.1083/jcb.122.3.729 ↗
3. Strategies toward biocompatible artificial implants: grafting of functionalized poly(ethylene glycol)s to poly(ethylene terephthalate) surfaces10.1002/pola.20352 ↗
4. Stereocomplex formation in Aba triblock copolymers of poly(lactide)(A) and poly(ethylene-glycol)(B)10.1002/macp.1995.021961121 ↗
5. Bulk and surface modifications of polylactide10.1007/s00216-004-2771-2 ↗
6. High-energy radiation and polymers: a review of commercial processes and emerging applications10.1016/S0168-583X(01)00966-1 ↗
7. In vitro biocompatibility of surface-modified poly(DL-lactide-co-glycolide) scaffolds with hydrophilic monomers
8. Studies on surface modification of poly(tetrafluoroethylene) film by remote and direct Ar plasma10.1016/j.apsusc.2007.10.029 ↗
9. Plasma-induced grafted polymerization of acrylic acid and subsequent grafting of collagen onto polymer film as biomaterials10.1016/0142-9612(95)00316-9 ↗
10. Deposition of a stable and high concentration of carboxylic acid functional groups onto a silicon surface via a tailored remote atmospheric pressure plasma process10.1016/j.surfcoat.2017.09.057 ↗
11. Atmospheric pressure plasma deposition of structurally well-defined polyacrylic acid films10.1021/cm020289e ↗
12. Experimental and theoretical Xps study of model molecules for poly(methyl methacrylate)10.1002/sia.740170205 ↗
13. Hydrolytic degradation of polylactic acid (PLA) and its composites10.1016/j.rser.2017.05.143 ↗