article·2014-02-15

Plasma sprayed metal-supported solid oxide fuel cell and stack with nanostructured anodes and diffusion barrier layer

Chang‐Sing Hwang, Chun‐Huang Tsai, Chun‐Liang Chang, Chih‐Ming Chuang, Zong‐Yang Chuang Shie, Shih‐Wei Cheng, Szu‐Han Wu

Publisher page

Abstract

Abstract Plasma sprayed LSGM (La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3 − δ ) based metal-supported solid oxide fuel cells with nanostructured LDC (Ce 0.55 La 0.45 O 2 − δ )–Ni anode and LSCM (La 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3 − δ ) diffusion barrier layer are developed in our institute. The non-sealed single cell measurement configuration is applied to test the performance and the durability of a prepared 10 × 10 cm 2 cell. The tested cell can deliver the power densities of 543, 480, 352 and 214 mW cm − 2 at 0.6 V for the test temperatures of 800, 750, 700 and 650 °C respectively. Results obtained from long term durability test show that this cell with a porous Ni–Fe metal substrate, a porous LSCM diffusion barrier layer, a porous nano-structured LDC–Ni anode layer, a thin dense LDC isolation layer, a dense crack free LSGM electrolyte layer, a porous LSGM–LSCF (La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 − δ ) cathode interlayer and a porous LSCF cathode current collecting layer has a degradation rate of ~ 2.2% kh − 1 during the test period of 3700 h at conditions of 700 °C and 400 mA cm − 2 current density. The tested 18-cell stack in a sealed configuration shows that it can deliver a power of 606 W at 42.4% fuel utilization, 0.75 V and 800 °C. Each cell in the stack has an open circuit voltage larger than 1 V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.