Rapid thermal annealing induced the c-axis (00 l) preferred orientation and the p-type thermoelectric properties of Bi-Sb-Te thin films
Source abstract
Abstract
Abstract Bi-Sb-Te thin films on SiO2/Si-wafer substrate were prepared by a magnetron co-sputtering process using Bi2Te3 (fixed: 50W) and Sb2Te3 (varied: 10, 15, 20 and 50W) targets. All as-deposited thin films were annealed by rapid thermal annealing (RTA) at 250°C under a vacuum state with a step of heating and holding each for 1 min. The effect of the RTA process onto thin film samples studied concerning the crystal structure, morphology, thickness, composition, and electrical and thermoelectric properties. The crystal structure of annealed samples showed the c-axis preferred orientation with the (00 l) plane (l = 15) and revealed a trend of p-type thermoelectricity behavior due to the RTA process. The annealed thin film compositions were BiTe, Bi0.92Sb0.08Te, Bi0.9Sb0.1Te, Bi0.88Sb0.12Te, and Sb2Te3. The Bi0.9Sb0.1Te thin film composition had the maximum power factor of 4.46 mW m–1 K–2 at a temperature of 100 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.