journal article·2016-09

Effect of Na on sulfurization growth of SnS thin films and solar cells using NaF/Sn-S precursor

Mutsumi Sugiyama, Tsubasa Yokoi, Akihiko Henmi, Takashi Asano

Thin Solid Films· Volume 615
Publisher page

Abstract

Abstract The role of NaF treatment in the production of SnS thin films and solar cells was investigated. The grain size of SnS films containing Na was large (about 500 nm) compared to that of SnS films prepared by conventional sulfurization (typically 250 nm). The carrier concentration of SnS increased from 5 × 10 16 to 2 × 10 17 cm − 3 by Na diffusion into the SnS film, and Na acted as an acceptor. Moreover, the NaF layer exhibited a capping effect during high-temperature sulfurization at 500 °C and suppressed the re-evaporation of SnS. The short-current density tended to increase from 1.1 to 8.8 mA/cm 2 with increasing thickness of the deposited NaF layer from 0 to 200 nm, because of the larger grain size and carrier concentration of SnS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Influence of temperature and pressure on the electronic transitions in SnS and SnSe semiconductors10.1103/PhysRevB.41.5227 ↗
2. Electronic structure of SnS deduced from photoelectron spectra and band-structure calculations10.1103/PhysRevB.46.7363 ↗
3. Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS10.1063/1.3675880 ↗
4. Overcoming efficiency limitations of SnS-based solar cells10.1002/aenm.201400496 ↗
5. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
6. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
7. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
8. Effects of potassium doping on solution processed kesterite Cu2ZnSnS4 thin film solar cells10.1063/1.4903500 ↗
9. Cu2SnS3 thin-film solar cells fabricated by sulfurization from NaF/Cu/Sn stacked precursor10.7567/APEX.8.042303 ↗
10. Preparation of SnS films by sulfurization of Sn sheet10.1143/JJAP.47.4494 ↗
11. Sulfurization growth of SnS films and fabrication of CdS/SnS heterojunction for solar cells10.1143/JJAP.47.8723 ↗
12. Preparation of SnS films by low temperature sulfurization10.1002/pssc.200881166 ↗
13. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
14. Enhancing the efficiency of SnS solar cells via band-offset engineering with a zinc oxysulfide buffer layer10.1063/1.4789855 ↗
15. SnS thin film solar cells with Zn1−xMgxO buffer layers10.1063/1.4804603 ↗
16. Efficiency limitations of thermally evaporated thin-film SnS solar cells10.1088/0022-3727/46/30/305109 ↗
17. Impact of growth temperature on the properties of SnS film prepared by thermal evaporation and its photovoltaic performance10.1016/j.cap.2015.03.026 ↗
18. Experimental determination of band offsets at the SnS/CdS and SnS/InSxOy heterojunctions10.1063/1.3294619 ↗
19. Photovoltaic properties of SnS based solar cells10.1016/j.solmat.2006.06.012 ↗
20. Optical and electrical properties of Sn2S3 thin films grown by spray pyrolysis10.1016/j.ssc.2009.10.032 ↗
21. Synthesis of SnS thin films via galvanostatic electrodeposition and fabrication of CdS/SnS heterostructure for photovoltaic applications10.1016/j.apsusc.2010.02.025 ↗
22. First principles study of point defects in SnS10.1039/C4CP03010A ↗
23. Band offset of SnS solar cell structure measured by X-ray photoelectron spectroscopy10.1016/j.tsf.2010.12.133 ↗
24. Experimental determination of vacuum-level band alignments of SnS-based solar cells by photoelectron yield spectroscopy10.1063/1.4866992 ↗