article·2001-06-01

The growth of MgO buffer layers on sapphire for the epitaxy of BaTiO3 optical thin films

J. G. Lisoni, Markus Siegert, Chang Lei, W. Biegel, J. Schubert, W. Zander, Ch. Buchal

Publisher page

Abstract

Abstract BaTiO 3 waveguides have been fabricated on r-cut sapphire single crystals using an epitaxial MgO(100) buffer layer. Both films were prepared by pulsed laser deposition (PLD). MgO was grown between 450 and 890°C, and BaTiO 3 was deposited at 1000–1050°C. The films were investigated by means of X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS), ion channeling (RBS/C), transmission electron microscopy and atomic force microscopy. These techniques revealed that the best epitaxial MgO(100) layers were those grown between 750 and 830°C and at 2×10 −3 mbar of oxygen pressure. The films were characterized by a full width at half maximum of less than 0.5° in the XRD rocking curves (Δω) of the MgO(200) reflection, a minimum RBS/C yield (χ min ) of ∼5% and a root-mean-square (rms) roughness of 1.7 nm. The BaTiO 3 films grown onto this buffer layers displayed similar properties: a Δω[BaTiO 3 (200)] of approximately 0.7°, a χ min of 4–5%, and a rms roughness of approximately 1.0 nm for a film of 440-nm thickness. The epitaxial relationship was found to be [BaTiO 3 (100)//MgO(100)]∼//Al 2 O 3 (1102).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · Photorefractive and Nonlinear Optics · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.