The effect of copper coating on nanocolumnar silicon anodes for lithium ion batteries
Source abstract
Abstract
Abstract In this work, a very thin (20 nm) copper (Cu) coated silicon (Si) nanocolums are produced by an oblique angle deposition method. Galvanostatic half-cell measurements show that, the Cu coated Si nanocolumn arrays perform 1700 mAh g− 1 in the first cycle, then after 10 cycles its performance is stabilized to 500 mAh g− 1 with 99% coulombic efficiency for 90 cycles. This high performance is related to its particular morphology and physical properties: having homogenously distributed nano-sized porosities in the Cu coated film increase the mechanical tolerance of the electrode against the volumetric changes occurred during galvanostatic test, plus the ductile behavior of the Cu film holds the electrode together to prevent the electronic isolation, pulverization or delamination of the coating, moreover the formation of Cu15Si4 intermetallic increases the mechanical resistances of the coating against the stress generated in the electrode, and the existence of the Cu top coat between the Si nanocolumns and the electrolyte changes the surface reactivity of the electrode, hence its interaction with the electrolyte leading to higher coulombic efficiency once a stable passive forms on the anode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Electrochemical characteristics of a-Si thin film anode for Li-ion rechargeable batteries10.1016/j.jpowsour.2003.10.013 ↗
2. High capacity, reversible silicon thin film anodes for lithium ion batteries10.1149/1.1596918 ↗
3. Designing nanostructured Si anodes for high energy lithium ion batteries10.1016/j.nantod.2012.08.004 ↗
4. Facile synthesis of Si nanoparticles using magnesium silicide reduction and its carbon composite as a high performance anode for Li ion batteries10.1016/j.jpowsour.2013.11.118 ↗
5. Facile spray-drying/pyrolysis synthesis of core-shell structure graphite/silicon-porous carbon composite as a superior anode for Li ion batteries10.1016/j.jpowsour.2013.10.012 ↗
6. Si based anodes via magnetron sputtering for LIB10.1149/2.009405eel ↗
7. Improving the stability of nanostructured silicon thin film lithium-ion battery anodes through their controlled oxidation10.1021/nn204896n ↗
8. Novel anode material for lithium-ion batteries: carbon-coated silicon prepared by thermal vapor decomposition10.1246/cl.2001.1186 ↗
9. Fabrication and characterization of Si nano-columns by femtosecond laser10.4028/www.scientific.net/JNanoR.16.15 ↗
10. High performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
11. Silicon nanowires coated with copper layer as anode materials for lithium-ion batteries10.1016/j.jpowsour.2010.12.075 ↗
12. Ordered arrays of 100 oriented silicon nanorods by cmos — compatible block copolymer lithography10.1021/nl070275d ↗
13. Uniform Si nanostructures grown by oblique angle deposition with substrates rotation10.1088/0957-4484/16/9/052 ↗
14. Enhanced layer coverage of thin films by oblique angle deposition
15. Growth of uniformly aligned nanorod arrays by oblique angle deposition with two-phase substrate rotation10.1088/0957-4484/15/7/018 ↗
16. Glancing angle sputter deposited nanostructures on rotating substrates: experiments and simulations10.1063/1.3018145 ↗
17. Glancing angle deposition: fabrication, properties and applications of micro- and nanostructured thin films10.1116/1.2764082 ↗
18. The growth of CuSi composite nanorod arrays by oblique angle co-deposition, and their structural, electrical, and optical properties10.1088/0957-4484/23/36/365703 ↗
19. Engineering a well-aligned composition-graded CuSi nanorod array by an oblique angle codeposition technique10.1021/cg101036m ↗
20. Stress reduction in tungsten films using nanostructured compliant layers10.1063/1.1803106 ↗
21. Influence of substrate temperature and deposition rate on structure of thick sputtered Cu coatings10.1116/1.568682 ↗
22. Microstructure and electrochemical properties of electron-beam deposited Sn–Cu thin film anodes for thin film lithium ion batteries10.1016/j.electacta.2007.11.064 ↗
23. Improvement of silicon powder negative electrodes by copper electroless deposition for lithium secondary batteries10.1016/j.jpowsour.2004.12.041 ↗
24. Interfacial properties of the a-Si/Cu: Active–inactive thin-film anode system for lithium-ion batteries10.1149/1.2184753 ↗
25. Structural considerations of intermetallic electrodes for lithium ion batteries10.1016/S0378-7753(02)00538-4 ↗
26. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
27. The crystal structural evolution of nano-Si anode caused by lithium insertion and extraction at room temperature10.1016/S0167-2738(00)00362-3 ↗
28. Electrochemically-driven solid-state amorphization in lithium–metal anodes10.1016/S0378-7753(03)00303-3 ↗
29. Electrochemically-driven solid-state amorphization in lithium–silicon alloys and implications for lithium storage10.1016/S1359-6454(02)00514-1 ↗
30. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
31. Electrochemical impedance study of initial lithium ion intercalation into graphite powders10.1016/S0013-4686(00)00782-9 ↗
32. Impedance analysis of silicon nanowire lithium ion battery anodes10.1021/jp901594g ↗
33. Comparison of kinetic properties of LiCoO2 and LiTi0.05Mg0.05Ni0.7Co0.2O2 by impedance spectroscopy10.1016/S0167-2738(03)00150-4 ↗
34. Silicon nanotube battery anodes10.1021/nl902058c ↗
35. The use of well-aligned composite nanorod arrays as anode material for lithium rechargeable batteries10.1016/j.jpowsour.2014.05.006 ↗
36. Characterization of high power lithium ion batteries by electrochemical impedance spectroscopy. II: modelling10.1016/j.jpowsour.2010.07.071 ↗
37. Two- and three-electrode impedance spectroscopy of lithium ion batteries10.1016/S0378-7753(02)00310-5 ↗