Investigation of optimum annealing parameters for formation of dip coated Cu2ZnSnS4 thin film
Source abstract
Abstract
Abstract Cu 2 ZnSnS 4 (CZTS) is most attractive absorber material for inorganic solar cell applications because of its cost effective and ecofriendly nature. To obtain phase pure CZTS film, effects of annealing parameters on synthesis of CZTS thin film are investigated. CZTS films are deposited through dip coating method followed by heat treatment to form crystalline CZTS thin films. Factors influencing the crystallinity, morphology and composition of the films such as annealing temperature, time, rate and atmosphere are studied through X-Ray Diffraction, Raman Spectroscopy, Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy. After numerous experiments of synthesis of CZTS in different annealing conditions and its characterization, it is observed that 1.4 eV band gap CZTS thin film of kesterite structure is obtained by annealing the film in nitrogen atmosphere for 60 min at 300 °C with 10 °C/min ramping rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Cu2ZnSnS4-type thin film solar cells using abundant materials10.1016/j.tsf.2006.12.103 ↗
2. Electrical and optical properties of stannite-type quaternary semiconductor thin films10.1143/JJAP.27.2094 ↗
3. Hetero-junctions based on Cu2ZnSnS4 and Cu2ZnSnSe4 thin films
4. Nelson · 2003
5. Björn-Arvid Schubert, Cu2ZnSnS4 solar cells prepared with sulphurized dc-sputtered stacked metallic precursors10.1016/j.tsf.2010.12.035 ↗
6. Preparation films by and evaluation of Cu2ZnSnS4 thin sulfurization of E-B evaporated precursors10.1016/S0927-0248(97)00119-0 ↗
7. Effect of selenization on sprayed Cu2ZnSnSe4 thin film solar cell10.1016/j.tsf.2013.03.094 ↗
8. Pulsed Electrodeposition of Cu2ZnSnS4 absorber layer precursor for photovoltaic application10.1016/j.tsf.2016.01.021 ↗
9. Earth-abundant non-toxic Cu2ZnSnS4 thin films by direct liquid coating from metal–thiourea precursor solution10.1016/j.solmat.2012.02.012 ↗
10. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
11. Dhayalan Velauthapillai, synthesis of Cu2ZnSnS4 thin films by dip-coating method without sulphurization10.1007/s10971-013-3006-9 ↗
12. One-step deposition of Cu2ZnSnS4 thin films for solar cells10.1016/j.solmat.2013.05.039 ↗
13. Non-vacuum processed Cu2ZnSnS4 thin films: influence of copper precursor on structural, optical and morphological properties10.1016/j.jallcom.2014.05.140 ↗
14. A water- and sulfurization-free solution route to Cu2−xZn1+xSnS410.1007/s10971-014-3462-x ↗
15. Fabrication and characterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique10.1016/j.tsf.2006.12.144 ↗
16. Ethylene glycol-based dip coating route for the synthesis of Cu2ZnSnS4 thin film10.1016/j.matlet.2012.10.120 ↗
17. One-step synthesis of high quality kesterite Cu2ZnSnS4 nanocrystals – a hydrothermal approach10.3762/bjnano.5.51 ↗
18. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
19. Nanoscale transformations in covellite (CuS) nanocrystals in the presence of divalent metal cations in a mild Reducing environment10.1021/acs.chemmater.5b03892 ↗
20. CZTS layers for solar cells by an electrodeposition-annealing route10.1016/j.electacta.2014.09.001 ↗
21. Substrate temperature effects on structural optical and electrical properties of vacuum evaporated Cu2ZnSnS4 thin films
22. A comparative study of structural and optical properties of Cu2ZnSnS4 nanocrystals for Photovotaic applications