article·2002-08-01

Copper interaction with a Ta silicate surface: implications for interconnect technology

Xiaoru Zhao, N.P. Magtoto, M. Leavy, Jeffry A. Kelber

Publisher page

Abstract

Abstract The TaSiO 6 films, ∼6 A thick, were formed by sputter deposition of Ta onto ultrathin SiO 2 substrates at 300 K, followed by annealing to 600 K in 2 Torr O 2 . X-ray photoelectron spectroscopy (XPS) measurements of the films yielded a Si(2p) binding energy at 102.1 eV and Ta(4f 7/2 ) binding energy at 26.2 eV, indicative of Ta silicate formation. O(1s) spectra indicate that the film is substantially hydroxylated. Annealing the film to >900 K in ultra-high vacuum resulted in silicate decomposition to SiO 2 and Ta 2 O 5 . The Ta silicate film is stable in air at 300 K. XPS data show that sputter-deposited Cu (300 K) displays conformal growth on Ta silicate surface (TaSiO 6 ) but 3D growth on the annealed and decomposed silicate surface. Initial Cu/silicate interaction involves Cu charge donation to Ta surface sites, with Cu(I) formation and Ta reduction. The results are similar to those previously reported for air-exposed TaSiN, and indicate that Si-modified Ta barriers should maintain Cu wettability under oxidizing conditions for Cu interconnect applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.