Effect of oxygen partial pressure on the structural and optical properties of ion beam sputtered TiO2 thin films
Source abstract
Abstract
Abstract Thin films of TiO2 were grown on quartz substrate at various oxygen partial pressure using ion beam sputtering technique. The surface, structural and optical (linear and nonlinear) properties of the deposited films were studied using X-ray reflectivity, atomic force microscopy and diffraction technique, UV–vis spectroscopy and Z-scan technique, respectively. A transition from amorphous to crystalline nature of the films, decrease in energy band gap and increase in nonlinear absorption coefficient were observed with increase in oxygen partial pressure. The improved nonlinear absorption coefficients and the saturable absorber response of the films suggest the utility of the grown TiO2 thin films as saturable absorbers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nonlinear Optical Materials Studies · Diamond and Carbon-based Materials Research · Nonlinear Optical Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Solar light decomposition of DFP on the surface of anatase and rutile TiO2 prepared by hydrothermal treatment of microemulsions10.1016/j.susc.2005.01.064 ↗
2. Vertically aligned single crystal TiO2 nanowire arrays grown directly on transparent conducting oxide coated glass: synthesis details and applications10.1021/nl802096a ↗
3. Synthesis and characterization of ZnO nanowires and their integration into dye-sensitized solar cells10.1088/0957-4484/17/11/S13 ↗
4. Room-temperature preparation of crystalline TiO2 thin films and their applications in polymer/TiO2 hybrid optoelectronic devices10.1016/j.orgel.2011.03.004 ↗
5. Mixed two-and three-photon absorption in bulk rutile (TiO2) around 800nm10.1364/OE.20.003118 ↗
6. TiO2 nanocomposites with high refractive index and transparency10.1039/c1jm13093e ↗
7. The deposition of nanocrystalline TiO2 thin film on silicon using sol-gel technique and its characterization10.1016/j.mee.2009.08.025 ↗
8. Optimization of deposition parameters on the physical properties of TiO2 thin films by spray pyrolysis technique10.12785/ijtfst/030101 ↗
9. Structural, morphological, and optical properties of TiO2 thin films synthesized by the electrophoretic deposition technique10.1186/1556-276X-7-357 ↗
10. Titanium dioxide thin films: preparation and optical properties
11. Optical properties of TiO2 thin films grown by PLD
12. Low loss niobium oxides film deposited by ion beam sputter deposition10.1023/A:1007050204074 ↗
13. Study of nonlinear optical properties of pure and Mg doped ZnO films10.1002/pssb.201451686 ↗
14. Thermo-optic coefficients of pure and Ni doped ZnO thin films10.1016/j.tsf.2016.01.059 ↗
15. M.C. Sekhar, P. Kondaiah, B. Radha Krishna, S. Uthanna, Effect of oxygen partial pressure on the electrical and optical properties of DC magnetron sputtered amorphous TiO2 films, J. Spectroscopy, 10.1155/2013/462734.
16. The effect of oxygen concentration on the low temperature deposition of TiO2 thin films10.1016/j.surfcoat.2007.08.075 ↗
17. Oxygen partial pressure dependence of the properties of TiO2 thin films deposited by DC reactive magnetron sputtering10.1016/j.proeng.2012.01.1326 ↗
18. Effect of oxygen pressure on the structural, morphology and optical properties of nanocrystalline TiO2 thin films prepared by pulsed laser deposition
19. Effect of oxygen partial pressure on the optical property of amorphous titanium oxide thin films10.1016/j.egypro.2011.10.060 ↗
20. High sensitivity, single beam n2 measurements10.1364/OL.14.000955 ↗
21. The optical absorption edge of brookite TiO210.1016/j.ssc.2005.10.024 ↗
22. Saturable absorption behavior of free-standing graphene polymer composite films over broad wavelength and time ranges10.1364/OE.23.000559 ↗