Stability of nano-thick transparent conducting oxide films for use in a moist environment

The stability of nano-thick transparent conducting oxide thin films in a high humidity environment was investigated. The stability of ITO and impurity-doped ZnO thin films prepared with a thickness in the range from approximately 20 to 100 nm on glass substrates at a temperature below 200 °C by a pulsed laser deposition was evaluated in air at a relative humidity of 90% and a temperature of 60 °C. The resistivity of all Al- and Ga-doped ZnO thin films tested was found to increase markedly with test time, whereas that of ITO remained relatively stable; the stability (resistivity increase) of the doped ZnO thin films was considerably affected by film thickness but was relatively independent of the deposition substrate temperature. In particular, doped ZnO thin films with a thickness below approximately 50 nm were very unstable under the test conditions. The resistivity increase of doped ZnO films is mainly attributed to the grain boundary scattering resulting from the adsorption of oxygen on the grain boundary.