Biodegradability and antibacterial properties of MAO coatings formed on Mg-Sr-Ca alloys in an electrolyte containing Ag doped hydroxyapatite
Source abstract
Abstract
Abstract Magnesium-based alloys are promising materials as next generation biodegradable implants, however low corrosion resistance and inadequate mechanical properties are limiting their application as a biodegradable implant material. In this study, Mg-Sr-Ca ternary alloys were prepared in a vacuum/atmosphere controlled furnace and coated by microarc oxidation (MAO) process for 5 min to decrease the degradation rate and enhance the biocompatibility. Moreover, Ag doped Hydroxyapatite nano powder (Ag-HA) was also added to alkaline MAO solution by amount of 1 and 10 g/l to improve the antibacterial properties while enhancing their bioactivity in a one single process. XRD, SEM-EDS, FTIR spectroscopy, simulated body fluid (SBF) immersion and antibacterial tests were employed for the characterization of the coated alloys. The results showed that, the addition of more Ag-HA increased the HA formation both before and after SBF immersion test and enhanced their antibacterial properties. However, Ag-HA addition decreased the corrosion resistance of the coated alloys in SBF compared to Ag-HA free coating. The results indicated that the present Ag-HA nano powder added MAO coating is a good combination to enhance the corrosion resistance, bioactivity and the antibacterial properties of Mg based biodegradable alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. On the cytocompatibility of biodegradable Fe-based alloys10.1016/j.msec.2012.11.002 ↗
2. Corrosion mechanisms of magnesium alloys10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
3. Preparation and characterization of a new biomedical magnesium-calcium alloy10.1016/j.matdes.2008.04.017 ↗
4. In vivo corrosion behavior of Mg-Mn-Zn alloy for bone implant application10.1002/jbm.a.31273 ↗
5. Biodegradable Mg corrosion and osteoblast cell culture studies10.1016/j.msec.2009.02.008 ↗
6. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
7. Magnesium implant alloy with low levels of strontium and calcium: the third element effect and phase selection improve bio-corrosion resistance and mechanical performance10.1016/j.msec.2013.11.011 ↗
8. Effects of extrusion and heat treatment on the mechanical properties and biocorrosion behaviors of a Mg-Nd-Zn-Zr alloy10.1016/j.jmbbm.2011.05.026 ↗
9. Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review10.1039/C3TB21746A ↗
10. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
11. Magnesium based degradable biomaterials: a review10.1007/s11706-014-0253-9 ↗
12. Corrosion resistance and antibacterial properties of ag-containing MAO coatings on AZ31 magnesium alloy formed by microarc oxidation10.1149/1.3301829 ↗
13. Biocompatibility and biodegradability of Mg–Sr alloys: the formation of Sr-substituted hydroxyapatite10.1016/j.actbio.2012.07.045 ↗
14. Addition of Zn to the ternary Mg-Ca-Sr alloys significantly improves their antibacterial properties10.1039/C5TB01319D ↗
15. Control of biodegradation of biocompatible magnesium alloys10.1016/j.corsci.2007.01.001 ↗
16. Microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Mn alloys for biomedical application10.1016/j.msec.2008.08.024 ↗
17. Research on an Mg-Zn alloy as a degradable biomaterial10.1016/j.actbio.2009.06.028 ↗
18. Microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys10.1016/j.msec.2016.04.012 ↗
19. Biocompatibility and biodegradability of Mg-Sr alloys: the formation of Sr-substituted hydroxyapatite10.1016/j.actbio.2012.07.045 ↗
20. Effect of strontium on the microstructure, mechanical properties, and fracture behavior of AZ31 magnesium alloy10.1007/s11661-006-1085-8 ↗
21. Fibrous growth of strontium substituted hydroxyapatite and its drug release10.1016/j.msec.2010.11.025 ↗
22. In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal10.1016/j.actbio.2012.02.018 ↗
23. Incorporation and distribution of strontium in bone10.1016/S8756-3282(01)00419-7 ↗
24. Strontium ranelate: a novel mode of action optimizing bone formation and resorption10.1007/s00198-004-1753-8 ↗
25. Nutrition in bone health revisited: a story beyond calcium10.1080/07315724.2000.10718070 ↗
26. Synthesis and characterization of Mg-Ca-Sr alloys for biodegradable orthopedic implant applications10.1002/jbm.b.32721 ↗
27. Silver ion doped ceramic nano-powder coated nails prevent infection in open fractures: in vivo study10.1016/j.injury.2015.10.006 ↗
28. Nano-Ag-loaded hydroxyapatite coatings on titanium surfaces by electrochemical deposition10.1098/rsif.2010.0366 ↗
29. Silver coated materials for external fixation devices: in vitro biocompatibility and genotoxicity10.1016/S0142-9612(01)00198-3 ↗
30. A silver ion-doped calcium phosphate-based ceramic nanopowder-coated prosthesis increased infection resistance10.1007/s11999-013-2894-x ↗
31. Analyses of the modulatory effects of antibacterial silver doped calcium phosphate-based ceramic nano-powder on proliferation, survival, and angiogenic capacity of different mammalian cells in vitro10.1088/1748-6041/10/4/045024 ↗
32. Chemical preparation of carbonated calcium hydroxyapatite powders at 37°C in urea-containing synthetic body fluids10.1016/S0955-2219(99)00132-6 ↗
33. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ9110.1016/j.corsci.2008.04.010 ↗
34. Effect of surface treatment on the bioactivity and electrochemical behavior of magnesium alloys in simulated body fluid10.1002/maco.201609317 ↗
35. An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing10.1016/j.corsci.2009.03.014 ↗
36. The synthesis of chitosan-based silver nanoparticles and their antibacterial activity10.1016/j.carres.2009.09.001 ↗
37. Direct fabrication of crystalline hydroxyapatite coating on zirconium by single-step plasma electrolytic oxidation process10.1016/j.surfcoat.2015.12.069 ↗
38. Microarc oxidation discharge types and bio properties of the coating synthesized on zirconium10.1016/j.msec.2017.03.230 ↗
39. Formation of oxygen bubbles and its influence on current efficiency in micro-arc oxidation process of AZ91D magnesium alloy10.1016/j.tsf.2005.03.050 ↗
40. Antibacterial properties of Ag (or Pt)-containing calcium phosphate coatings formed by micro-arc oxidation10.1002/jbm.a.31877 ↗
41. Effect of preparation parameters on the properties of hydroxyapatite containing micro-arc oxidation coating on biodegradable ZK60 magnesium alloy10.1016/j.ceramint.2014.02.104 ↗
42. Phase and thermal stability of nanocrystalline hydroxyapatite prepared via microwave heating10.1016/j.tca.2006.04.013 ↗
43. Research of calcium phosphates using Fourier transform infrared spectroscopy