Hydrothermal synthesis, characterization of h-WO3 nanowires and gas sensing of thin film sensor based on this powder

Abstract The monodisperse hexagonal WO 3 (h-WO 3 ) nanowires were synthesized using hydrothermal treatment through the acidification of Na 2 WO 4 · 2H 2 O by addition of K 2 SO 4 and Na 2 SO 4 . The obtained products were characterized using X-ray powder diffraction, field emission scanning electron microscopy and transmission electron microscopy. It showed a high crystallinity and good dispersity of nanowire structure with the exposure of crystal facets. Based on h-WO 3 products, thin film sensors were prepared. The gas-sensing properties to various concentrations (10, 20, 50, 100, and 200 ppm) of ethanol and formaldehyde were investigated. The h-WO3 nanowires exhibited high responses to both ethanol and formaldehyde gas. The sensor exhibited remarkably good response and fast response/recovery time, which were as short as 6–8 s. A possible reason for the influence of oxide structure on the sensing properties of thin film sensors is proposed. This work shows great potential for the preparation of 1D h-WO 3 nanostructures and their application in the detection of toxic gases.