Facile fabrication of photoinduced superhydrophobic–superhydrophilic surfaces on cellulose substrate without strength loss

A novel strategy was reported on the design and fabrication of functional photosensitive hybrid sols (FPHSs) by non-alcoholic emulsification in the presence of a TiO ₂ nanoparticle and photoinitiator via a sol-gel process using tetraethylorthosilicate, γ-methacryloxypropyltrimethoxysilane (MPS) and hydrophobic silane coupling agents as precursors. Smart cellulose substrates with alterable superhydrophobic–superhydrophilic conversion were fabricated using FPHS via the ultraviolet (UV) curing process. The liquid FPHS was photocured into solid gel during UV irradiation for 40 s with MPSs in FPHS, which was verified via Fourier transform infrared spectra. The cellulose substrates were modified with FPHSs, and the water contact angles of the modified cellulose substrates were more than 150°. The superhydrophobicity was improved by the gathering of hydrophobic chains and particle deposition of hybrid gel on the fiber surface. Nevertheless, the water contact angles of the modified cellulose substrates were receded with UV irradiation from 158° to 0° in 200 min, due to TiO ₂ photoinduction. The irradiated cellulose substrates were placed in the dark, and the water contact angles were recovered to about 130°, gradually. What is more, the reversible process can be repeated more than eight times. The modified cellulose substrate presented excellent washing fastness, even suffering 10 times washing processing. The mechanical properties, including breaking strength and elongation rate, were improved after the coating and UV curing process, which considerably remedied the defects of the heating curing process on the mechanical properties.